Settlement and Particle Breakage of Soft Rockfill Materials in Medium Scale Oedometer

Document Type : Original Research

Authors
1 Associate Professor, faculty of civil and environmental engineering, Tarbiat Modares University
2 Phd candidate, faculty of civil and environmental engineering, Tarbiat Modares University, Tehran
Abstract
Rockfill materials are used in construction projects such as dam construction, road construction and so on. Due to the increasing use of these materials, experiments and studies have also been carried out on this material and usually, these studies have been carried out on strong rockfill materials. Today, the use of soft and weak rockfill materials has expanded because the economic and environmental issues. These marginal materials traditionally would not be used owing to their unfavorable engineering properties that is, low strength, high compressibility, and proneness to material degradation with time. Therefore, the use of soft rocks excavated on site as rockfill materials for high rockfill dams is still a controversial issue, as weathering takes place when the rock is exposed to an environment in which variations in air, temperature, and water content are involved. and still no comprehensive studies have been conducted on soft rockfill materials and need more information on the behavior of these materials in different conditions. One of the most important subject discussed in the rockfill materials is the particle breakage phenomena. Particle breakage index that quantifies the degree of particle breakage, can reflect the degree of particle crushing of material. To select weak rockfill materials, we visited the Nohob dam that is under construction and rockfill material in spillway excavation section is thrown away and it is not used in the construction of the dam. With considering that the dimensions of the usable rockfill material may be much larger than the dimensions of the laboratory equipment. Therefore, it is always a matter of scaling and matching the results of the laboratory and the field from the important items of rockfill materials. In this research, the behavior of weak rockfill materials has been studied in medium scale oedometer apparatus, in dry, wet and saturate conditions and also Los Angeles experiment is done. Based on the present study, the particle breakage increases with the addition of water and in saturate conditions, particle breakage also has a slight increase compared to wet conditions and for settlements and deformations of wet and dry specimens of materials show that wet specimens settlements are more than dry specimens.

Keywords

Subjects


[1] ICOLD, 1993. Rock material for Rockfill Dams-Review and Recomendation-Bulletin 92.
[2] Vitenberg, m & Melnik, V 1982. Influence of soft rock-fill material as dam embankment. Journal of Rock Mechanics and Geotechnical Engineering.
[3] Brown, a. J., 1989. Discussion: Use of soft rockfill at Evretou Dam, Cyprus. Géotechnique, 39(3), pp.563–564.
[4] Xing, H.-F. et al., 2006. Construction of Concrete-Faced Rockfill Dams with Weak Rocks. Journal of Geotechnical and Geoenvironmental Engineering, 132(6), pp.778–785.
[5] FU Jun, Z.X., 2008. Engineering Properties of Soft Rock Materials Used in Concrete Face Dams. Journal of Yangtze river scientific research institue, 4.
[6] Zhang, B.Y., Zhang, J.H. & Sun, G.L., 2012 . Particle breakage of argillaceous siltstone subjected to stresses and weathering. Engineering Geology, 137–138, pp.21–28.
[7] Marsal, R., 1967. Large scale testing of rockfill material. Journal of the soil mechanics and foundation division, 93, pp.27–43.
[8] Xiao, Y., Liu, H., Zhang, W., Liu, H., Yin, F., & Wang, Y., 2016. Testing and modeling of rockfill materials: A review. Journal of Rock Mechanics and Geotechnical Engineering, 8(3), 415-422.
[9] Kanji, M.A., 2014. Critical issues in soft rocks. Journal of Rock Mechanics and Geotechnical Engineering, 6(3), pp.186–195.
[10] ICOLD, 2008. Weak Rocks and shales in Dams-Bulletin134.
[11] Komak Panah, A., Aghamajidi, M., 2010, The creep of rockfill materials in large scale oedometer with the aspect of particle breakage and Los Angeles test, Civil Engineering Journal of Modares, vol. 10, No. 1, pp. 103-114.(In Persian)
[12] ASTM C535, 2003 ,Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine.
[13] Absaran Consulting Engineers,2010. Nohob Storage Dam Studies, Qazvin Regional Water Authority. (In Persian)
[14] ISRM, 2000. Suggested Methods for Determining the Uniaxial Compressive Strength and Deformability of Rock Materials.
[15] Honkanandavar, N.P, Sharma, K.G., 2014. Effect of particle breakage on stress-strain-volume change bahaviour of alluvial rockfill material. Proceeding of Indian Geotechnical Conference.
[16] Marachi, N. D., 1969. Strength and Deformation. Characteristics of Rockfill Materials. Report No. TE-69-5 to State of California Department of Water Resources.
[17] Lowe, 1964. Shear strength of coarse embankment dam materials. Proc. 8th International Congress on Large Dams, 3, 745-761.
[18] ASTM D4254, 2016. Standard test methods for minimum index density and unit weight of soils and calculation relative density.
[19] ASTM D4253, 2016, standard test methods for maximum index density and unit weight of soils using a vibratory table.
[20] Gupta, A., 2005. Effect of particle size and confining pressure on breakage and strength parameters of rockfill materials. EJGE, vol.14.
[21] Gupta, A. K., 2009. Effect of particle size and confining pressure on breakage and strength parameters of rockfill materials. Electronic Journal of Geotechnical Engineering, 14(Bund. H), 1-12.