Experimental Study on the Effect of Aggregate Fineness Modulus on Physical and Mechanical Properties of Concrete

Authors
M. Yazdandoust
M. Yazdani
Tarbiat Modarres University
Abstract
Abstract:
Concrete is one of moderately new materials, which is used widely because of its appropriate properties. Many Scientifics and researchers have tried to develop and utilize the beneficial properties of this new material and as a result its ingredients have been investigated extensively. Concrete properties are dependent on many parameters such as ingredients, production and technology, construction methods and curing conditions that have made concrete a complex and unpredictable material. But these are virtually ignorable against its precious advantageous and precise studies on above parameters may help us to produce concretes with desirable properties.
As it was discussed previously, ingredients are of those important parameters that play an essential role. Therefore investigating ingredients, their interactions and effects of their properties on properties of concrete are seriously important. Of the most important of concrete ingredients are aggregates, which are usually deemed unimportant despite their momentous contribution to concrete production. As about three forth of concrete's volume is its aggregates, studying aggregates' properties including the effect of grain size distribution on physical and mechanical properties of concrete is pivotal, although few comprehensive and acceptable investigations have been carried so far. Shape, particle size distribution, dimensions, surface characteristics, and minerals are parameters which are effective in making a homogenous and united medium. In fact there are various parameters (criteria) which determine an ideal material. In this study, the effect of fineness module of fines aggregate on mechanical and physical parameters of concrete has been investigated among other parameters. Fineness module is defined as total accumulated percentage of remained material on standard sieves in fines range.
In this study and in respect to above factors, in order to study the effect of fineness modulus of aggregates on physical and mechanical properties of concrete, using 7 different grain size distributions with various fineness modulus and 11 cement-water ratios, totally 77 different mix designs were tested for slump test.
Also 462 samples were prepared using those various mix designs and were tested at 7 and 28-day life long under compressive loads. The obtained results suggest clearly the direct effect of fineness modulus of aggregates on mechanical and physical properties of concrete. In details, the decrease in fineness modulus from 3.26 to 2.66 has caused an increase in slump values and compressive strengths.
The rise in compressive strength can be addressed to more unity for aggregates with smaller fineness modulus. Furthermore, the existence of smaller aggregates (smaller fineness modulus) has led to more comfortable conditions for larger grains to travel. This in turn incited the slump values' boost while fineness modulus decreased. As a result it can be concluded that the grain size distribution can play a crucial role in dominating physical and mechanical properties of concrete.

Keywords

5- مراجع
[1]  Perry C, Gillott JE. The Influence of Silica Fume on the Strength of the Cement-Aggregate Bond. ACI Materials Journal, V. 156, September 1995, pp. 191-212.
[2]  Neville AM. Aggregate Bond and Modulus of Elasticity of Concrete. ACI Materials Journal, V. 94, No. 1, January-February 1997, pp. 71-74.
[3]  Tasdemir C, Tasdemir MA, Mills N, Barr IG, Lydon FD. Combined Effects of Silica Fume, Aggregate Type, and Size on Post-Peak Response of Concrete in Compression. ACI Materials Journal, V. 96, January 1999, pp. 74-83.
[4]  Aitcin PC, Metha PK. Effect of Coarse – Aggregate Characteristics on Mechanical Properties of High-Strength Concrete. ACI-Mater-j- 1990; V.87; NO.2: 103-107.
[5]  Wu KR, Chen B, Yao W, Zhang D. Effect of coarse aggregate type on mechanical properties of high-performance concrete. Cement and Concrete Research 31 (2001) 1421–1425
[6]  Wu KR, Chen B, Yao W, Zhang D. Effect of coarse aggregate type on mechanical properties of high-performance concrete. Cement and Concrete Research 31 (2001) 1421–1425
[7]  Poon CS, Lam CS. The effect of aggregate-to-cement ratio and types of aggregates on the properties of pre-cast concrete blocks. Cement & Concrete Composites 30 (2008) 283–289
[8]  Mass GR. Aggregate Particle Shape Considerations. ACI Materials Journal, V. 5, August 1983, pp. 23-29.
[9]  Donza H, Cabrera O, Irassar EF. High-strength concrete with different fine aggregate. Cement and Concrete Research 32 (2002) 1755–1761
[10]  Kennedy HL. Revised Application Of Fineness Modulus In Concrete Proportioning. ACI Materials Journal, V. 36, June 1940, pp. 597-614.
[11] مجید یزداندوست، طرح و ساخت بتن پلیمری جهت استفاده به صورت شاتکریت با هدف تأمین پوشش نگهداری دائمی تونلها، پایان نامه کارشناسی ارشد، دانشکده فنی، دانشگاه تربیت مدرس، سال 1385
[12]  Nevil AM, Brooks JJ. Concrete Technology. Longman Science & Technical, 1987.
[13]  Okamura, Hajime. Self-Compacting High-Performance Concrete. Concrete International Journal, July 1997, pp. 50-54.
[14]  ACI Committee 212. Admixtures for concrete. Concrete. Int., Vol. 3, No. 5,pp. 24-52,1981.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
[15]  Larrard F, Belloc A. The Influence of Aggregate on the Compressive Strength of Normal and High-Strength Concrete. ACI Materials Journal, V. 94, No. 5, September-October 199, pp. 417-426.
[16]  Lessard M, Chaallal O, Action PC. Testing of High-Strength Concrete Compressive Strength. ACI Materials Journal, V. 90, No. 4, July-August 1993, p.303-308.
[17]  Khayat  KH, Bickley JA, Hooton  RD. High-Strength Concrete Properties Derived From Compressive Strength Values. Cement, Concrete, and Aggregates, CCAGDP, V.17, No.2, Dec. 1995, pp. 126-133.
Modares Civil Engineering journal
Volume 13, Issue 2
May and June 2013
Pages 161-172