A new method for damage detection minor damages in the piers of straight bridges using fragility curves of harmonic forces

Document Type : Original Research

Authors
Tarbiat Modares University
Abstract
Due to the increase in the age of bridges, the explanation and use of effective methods for detecting partial damage with the help of health monitoring systems are crucial since they provide the conditions for repairing the damage before the damage increases. One of the primary goals of this article is to provide an effective and efficient method for health monitoring and detect partial damage in the pier of a straight bridge using fragility curves of harmonic forces, and provide a criterion to show the correlation of fragility curves in healthy and damaged states. To achieve these goals, a complete model of a straight bridge that includes 8 piers, each 10 meters high and its deck includes 5 openings, the length of each is 15 meters, and the total length of the deck of 75 meters was modeled in the CSI Bridge software, and then, was validated. To detect the most vulnerable column for damage modeling for health monitoring operations, three earthquake records corresponding to the soil of the construction site were successively applied to the model. By examining the decrease in the slope of the moment-rotation graphs, the level of damage that occurred at the bottom of the column was detected. Finally, it was found that the middle piers were more prone to seismic damage and health monitoring operations were performed on one of the middle columns. To draw the fragility curves of harmonic forces, harmonic forces were first applied to the top of the column, and then, the rotations created at the bottom of the column were measured. Based on the obtained data and using the relevant relations, the fragility curves were drawn. The index of the maximum intensity of force, the index of rotation damage that occurred at the bottom of the column, and the defined performance level of exceedance from the linear state are the characteristics of these fragility curves. To draw the fragility curve in the damaged state, the desired earthquake (seismic) force was first applied to the bridge, and then, harmonic forces were applied to the top of the desired column. The results of this study revealed that the fragility curves of harmonic forces have been drawn well in healthy and partially damaged states according to the defined characteristics, and partial damages with different intensities have been correctly detected. To examine the correlation of the fragility curves of harmonic forces in both damaged and healthy states, two new criteria PCOMAC and PDI were introduced. The results of this article indicate that the PCOMAC criterion is very suitable for examining the correlation of fragility curves of harmonic forces.

Keywords

Subjects


[1] Ahmadi, H., 2012. detection of seismic damage of concrete piers of railway bridges using time-frequency analysis. Dissertation for Civil Engineering- Earthquake Doctoral Course, Faculty of Civil and Environmental Engineering, Tarbiat Modares University.
[2] Xiang, N., et al. 2019. Passive seismic unseating prevention strategies implemented in highway bridges: A state-of-the-art review. Journal of Engineering Structures, vol. 194 (9), pp. 77-93.
[3] Wenzel H. Health monitoring of bridges. John Wiley & Sons; 2008 Nov 20, ISBN: 978-0-470-03173-5.
[4] Doebling, S., et al. 1996. Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review. Los Alamos National Laboratory is operated by the University of California.
[5] Asadi Zeidabadi, A., Bakshi, A., Ghotra Amiri, G., 2016. Structural health monitoring based on experimental wavelet transform method and fuzzy logic. Dissertation of Master's Degree in Civil-Structural Engineering, Faculty of Civil Engineering, Sharif University of Technology.
[6] Karbhari, V., Lee, L.S., 2009. Vibration-based damage detection techniques for structural health monitoring of civil infrastructure systems. Structural Health Monitoring of Civil Infrastructure Systems; A volume in Woodhead Publishing Series in Civil and Structural Engineering, pp. 177-212.
[7] Kim, J., Stubbs, N., 2003. Nondestructive Crack Detection Algorithm for Full-Scale Bridges. Journal of structural engineering, vol. 129, pp. 1358-1366.
[8] Zhou, H.F., Ni, Y.Q., KO, J.M., 2011. Eliminating Temperature Effect in Vibration-Based Structural Damage Detection. Journal of Engineering Mechanics, vol. 137, pp. 758-796.
[9] An, Y., et al, 2019. Recent progress and future trends on damage identification methods bridge structures. Journal of Structural Control and Health Monitoring, vol. 26(1).
[10] Stubbs, N., Kim, j., Farrar, C., 1995. Field verification of a nondestructive damage localization and severity estimation algorithm. In: Proceedings of SPIE - The International Society for Optical Engineering.
[11] Hou, R., Xia, Y., 2021. Review on the new development of vibration-based damage identification for civil engineering structures: 2010-2019. Journal of Sound and Vibration, vol. 491, no 9.
[12] Dilena, M., Limongelli, M.P., Morassi, A, 2014. Damage localization in bridges via the FRF interpolation method. Journal of Mechanical Systems and Signal Processing.
[13] Sohn, H., Czarnecki, J.A., Farrar, C., 2000. Statistical process control and projection techniques for structural health monitoring. In: European COST F3 Conference on System Identification & Structural Health Monitoring, Madrid, Spain.
[14] Bayat, M., Ahmadi, H.R., Mahdavi, N., 2019. Application of power spectral density function for damage diagnosis of bridge piers Journal of Structural Engineering and Mechanics , vol. 71, no 1, pp. 57-63.
[15] Bayat, M., Daneshjoo, F., Nisticò, N., 2015. A novel proficient and sufficient intensity measure for probabilistic analysis of skewed highway bridges. Journal of Structural Engineering and Mechanics, vol. 55, no 6, pp. 1177-1202.
[16] Ren, L., et al., 2019. Seismic Fragility Analysis of Bridge System Based on Fuzzy Failure. Journal of Advances in Civil Engineering, Article ID 3592972, vol. 55.
[17] Alam, J., Kim, D., Chio, B., 2019. Seismic ris assessment of intake tower in Korea using updated fragility by Bayesian inference. Journal of Structural Engineering and Mechanics, vol. 69, no 3, pp. 317-326.
[18] Soltanimohammadi, M., Rahimi, S., 2019. Book of probabilistic methods in seismic evaluation of structures. ISBN: 9786227034042.
[19] Daneshjoo, F., 2015, Earthquake Engineering Lecture – 21: Nonlinear dynamic analysis Single and multiple increments, Tarbiat Modares University, Tehran, Iran, Researchgate.net Publiction, Technicla Report.
[20] Cheng, Y., Zhang, J., Jiajia, W., 2019. Fragility Analysis of a Self-Anchored Suspension Bridge Based on Structural Health Monitoring Data. Journal of Advances in Civil Engineering, vol. 2019, Article ID 7467920.
[21] Tabaei, A., Daneshjoo, F., 2014. Development of COMAC and damage index methods to detect damage on the side of bridge supports. The scientific-research journal of Omran Modares, vol. 15, no. 4, pp. 260-245.
[22] Ndambi, J.M., Vantomme, K., 2002. Damage assessment in reinforced concrete beams using eigenfrequencies and mode shape derivatives. Journal of Engineering Structures, vol. 24, no 3, pp. 501-515.
[23] Joladarian, H., Naderi, M., 2015. Seismic modal analysis of bridges located in horizontal arch. Master's thesis in Civil-Structural Engineering, Technical and Engineering Faculty, Imam Khomeini International University.
[24] Code 463, Regulations for designing road and railway bridges against earthquakes, 1387, Vice President of Planning and Strategic Supervision, Tehran.