A new method for determining the natural frequencies of structures from their ambient vibration

Document Type : Original Research

Authors
A. zayeri baghlani nejad 1
M. Mahmoudi 2
1 Ph.D. Candidate, Department of Civil Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran.
2 Associate Professor, Department of Civil Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran.
Abstract
The load type imposed on the structures is one of the important issues of the modal identification Experimental methods. Generally the loads applied to a structure for dynamic testing are divided into two categories: artificial stimulation and ambient loads. Applying artificial loads to large structures such as bridges and tall buildings is difficult, costly and in some cases impossible. For this reason, modal identification of such structures is generally done by ambient vibration tests. However this experimental methods, also include problems such as large noise amplitude relative to the measured responses that this causes errors in the results and in some cases leads to unrealistic modes. As a solution, modal information can be calculated from several different methods and compared with each other to ensure the accuracy of the results. In this paper, a new scheme for natural frequencies extraction of structures from their ambient vibration is presented. For this purpose, the combination of two mathematical techniques of random decrement (RD) and proper orthogonal decomposition (POD) methods were used. The reason for using these two methods, is their ability to reduce the noise effects. In other words, combining of these two methods can lead to a very powerful tool for extracting structural frequencies from its ambient vibration under high amplitude noise conditions. The proposed algorithm consists of three steps: In the first step, after measuring the acceleration response of the structure at the appropriate points, the effects of random vibration are eliminated from the response by RD method and only dynamic properties of the structure remain in the acceleration records. Secondly, the acceleration records are separated into several structural modes using the proper orthogonal decomposition technique and finally, at the last step, the proceeded responses are transformed by the fast Fourier transform into the frequency domain to extract the natural frequencies of the structure. The strength of the proposed method is its robustness to the use of very high amplitude noise data, which is one of the challenges in the ambient vibration experiments. The accuracy of the proposed algorithm was evaluated by numerical modeling and experimental study. To investigate the efficiency of the new method, the numerical and experimental results were compared with the frequencies obtained from commonly modal identification methods such as extended frequency domain decomposition (EFDD) and stochastic subspace identification (SSI). A very good agreement was observed between the results of methods. Furthermore, Studying the effect of noise on the new algorithm results shows that increasing the ratio of noise to acceleration amplitude up to 250, did not affect the results precision and the main frequencies of the structure can be obtained with good accuracy. In this study, the effect of the number of sensors used in the ambient vibration test also was investigated on the accuracy of the new algorithm results. It was concluded that the minimum number of sensors (even one number) and repetition of the experiment can be used to extract structural frequencies from its ambient vibration with high accuracy. The results of this study showed that the new method can be used as a suitable tool to determine the natural frequencies of structures from its ambient vibration under severe noise conditions and to control the results obtained from other methods.

Keywords

Subjects

[1] Brincker, R., Zhang, L. and Andersen, P., 2000, February. Modal identification from ambient responses using frequency domain decomposition. In Proc. of the 18th International Modal Analysis Conference (IMAC), San Antonio, Texas.
[2] Brincker, R., Ventura, C. and Andersen, P., 2001, February. Damping estimation by frequency domain decomposition. In Proceedings of the 19th international modal analysis conference (IMAC) (pp. 5-8).
[3] Brincker, R., Zhang, L. and Andersen, P., 2001. Modal identification of output-only systems using frequency domain decomposition. Smart materials and structures, 10(3), p.441.

[4] Karbhari, V.M. and Ansari, F. eds., 2009. Structural health monitoring of civil infrastructure systems. Elsevier Publishing.
[5] Van Overschee, P. and De Moor, B.L., 2012. Subspace identification for linear systems: Theory—Implementation—Applications. Springer Science & Business Media.
[6] Idris, N.S., Koh, H.B. and Kamarudin, A.F., 2015. A Review of Ambient Vibration Technique on Bridges. In Applied Mechanics and Materials (Vol. 773, pp. 1002-1006). Trans Tech Publications Ltd.
[7] Amezquita-Sanchez, J.P. and Adeli, H., 2016. Signal processing techniques for vibration-based health monitoring of smart structures. Archives of Computational Methods in Engineering, 23(1), pp.1-15.
[8] Perez-Ramirez, C.A., Amezquita-Sanchez, J.P., Adeli, H., Valtierra-Rodriguez, M., Romero-Troncoso, R.D.J., Dominguez-Gonzalez, A. and Osornio-Rios, R.A., 2016. Time-frequency techniques for modal parameters identification of civil structures from acquired dynamic signals. Journal of Vibroengineering, 18(5), pp.3164-3185.
[9] Sirca Jr, G.F. and Adeli, H., 2012. System identification in structural engineering. Scientia Iranica, 19(6), pp.1355-1364.
[10] Wenzel, H., 2009. Ambient vibration monitoring. Encyclopedia of Structural Health Monitoring. John Wiley and Sons Publications.
[11] Newland, D.E., 2012. An introduction to random vibrations, spectral & wavelet analysis. Courier Corporation.
[12] Cole Jr, H.A., 1968, April. On-the-line analysis of random vibrations. In 9th Structural Dynamics and Materials Conference (p. 288).
[13] Cole Jr, H.A., 1971. Failure detection of a space shuttle wing flutter model by random decrement, NASA TMX-62,041.
[14] Cole Jr, H.A., 1973. On-line failure detection and damping measurement of aerospace structures by random decrement signatures, NASA CR-2205.
[15] Ibrahim, S.R., 1977. Random decrement technique for modal identification of structures. Journal of Spacecraft and Rockets, 14(11), pp.696-700.
[16] Vandiver, J.K., Dunwoody, A.B., Campbell, R.B. and Cook, M.F., 1982. A mathematical basis for the random decrement vibration signature analysis technique, Journal of Mechanical Design, 104(2), pp.307-313.
[17] Brincker, R., Kirkegaard, P.H. and Rytter, A., 1991. Identification of system parameters by the random decrement technique. Instituttet for Bygningsteknik, Aalborg Universities center.
[18] Asmussen, J.C., 1997. Modal analysis based on the random decrement technique: application to civil engineering structures (Doctoral dissertation, Department of Mechanical Engineering, Aalborg University).
[19] Ibrahim, S.R., 2001. Efficient random decrement computation for identification of ambient responses. In Proceedings of SPIE, the International Society for Optical Engineering (Vol. 4359, pp. 1-6). Society of Photo-Optical Instrumentation Engineers.
[20] Rodrigues, J., Brincker, R. and Andersen, P., 2004, January. Improvement of frequency domain output-only modal identification from the application of the random decrement technique. In Proc. 23rd Int. Modal Analysis Conference, Deaborn, MI (pp. 92-100).
[21] Rodrigues, J. and Brincker, R., 2005. Application of the random decrement technique in operational modal analysis. In 1st International Operational Modal Analysis Conference (pp. 191-200). Aalborg University.
[22] Dande, H.A., 2010. Panel Damping Loss Factor Estimation Using the Random Decrement Technique (Doctoral dissertation, University of Kansas).
[23] Liang, Y.C., Lee, H.P., Lim, S.P., Lin, W.Z., Lee, K.H. and Wu, C.G., 2002. Proper orthogonal decomposition and its applications—Part I: Theory. Journal of Sound and vibration, 252(3), pp.527-544.
[24] Eftekhar Azam, S.E., 2014. Online damage detection in structural systems: Applications of proper orthogonal decomposition, and Kalman and particle filters. Springer Science & Business Media.
Modares Civil Engineering journal
Volume 20, Issue 5
November and December 2020
Pages 89-102