Investigation of the behavior of mid – rise steel moment resisting frame with long spans exposed to fire and progressive collapse

Document Type : Original Research

Authors
1 M.Sc. of Structural Engineering, Faculty of Civil and Environmental Engineering, Tarbiat Modares university
2 Professor of Structural Engineering, Faculty of Civil and Environmental Engineering, Tarbiat Modares university
Abstract
This paper investigates the behavior of a steel moment frame system with long spans subjected to compartment fires and progressive collapse scenarios due to girder drop and column removal. In this study, initially, a typical 15 – story building with moment frame system with long spans and story height 3.2 (m) was designed using relevant chapters of national building code of Iran for conventional gravity and lateral loads. In order to perform thermal analyses, the most critical frame of this structure is modelled in finite element software OpenSees. Then the nonlinear behavior of the frame is studied at elevated temperatures under different fire scenarios and progressive collapse Scenarios due to girder drop and column removal. In this analyses, the structure is subjected to both gravity and thermal loading simultaneously. Also for performing thermal analyses, nonlinear analyses and standard fire curve (ISO 834) are used.

Results of this study indicate that beams do not deform significantly until approximately 400°C, but after that, vertical displacements of beams increase significantly due to degrading mechanical properties of steel. So beams deform and collapse at about 500°C to 600°C. Also heating the beams of structure, initially causes the axial force in the beams due to thermal expansion restraint. So Demand to Capacity Ratios of beams increase from early stages of fire and the most increase in DCRnom occurs at about 350°C to 400°C. Also by one story girder drop, columns survive to 500°C. But at higher temperatures (about 600°C to 800°C), these heated columns lose their strength and buckle. In column removal scenarios in first and 7th story, where beams have lost their strength under effect of gravity loads and at about 400°C respectively, more damage is observed compared to girder drop scenarios.

Keywords

Subjects


[1] Bažant, Zdeněk P, and Yong Zhou. 2002. 'Why did the world trade center collapse?—Simple analysis', Journal of Engineering Mechanics, 128: 2-6.
[2] Kotsovinos, Panagiotis, and Asif Usmani. 2013. 'The World Trade Center 9/11 disaster and progressive collapse of tall buildings', Fire technology, 49: 741-65.
[3] Usmani, AS, YC Chung, and Jose L Torero. 2003. 'How did the WTC towers collapse: a new theory', Fire Safety Journal, 38: 501-33.
[4] Behnam, Behrouz. 2018. 'Fire Structural Response of the Plasco Building: A Preliminary Investigation Report', International Journal of Civil Engineering: 1-18.
[5] Shakib, Hamzeh, M Pirizadeh, S Dardaei, and M Zakersalehi. 2018. 'Technical and administrative assessment of Plasco building incident', International Journal of Civil Engineering, 16: 1227-39.
[6] Lennon, T. 2016. "BRE Cardington Steel Framed Building Fire Tests, The Building Research Establishment, UK." In.
[7] Usmani, A, D Drysdale, J Rotter, A Sanad, M Gillie, and S Lamont. 2000. 'Behaviour of steel framed structures under fire conditions', University of Edinburgh, Edinburgh.
[8] Lamont, Susan. 2001. 'The behaviour of multi-storey composite steel framed structures in response to compartment fires'.
[9] Wald, F, P Studecká, and L Kroupa. 2004. 'Temperature of steel columns under natural fire', Acta Polytechnica, 44.
[10] Rahman, A, R Hawileh, and M Mahamid. 2004. 'The effect of fire loading on a steel frame and connection', WIT Transactions on The Built Environment, 76.
[11] Flint, Graeme, Asif Usmani, Susan Lamont, Jose Torero, and Barbara Lane. 2006. 'Effect of fire on composite long span truss floor systems', Journal of Constructional Steel Research, 62: 303-15.
[12] Röben, C, M Gillie, and J Torero. 2010. 'Structural behaviour during a vertically travelling fire', Journal of constructional steel research, 66: 191-97.
[13] DoD. 2010. "Design of Buildings to Resist Progressive Collapse." In. Unified Facilities Criteria (UFC) 4-023-03, 14 July 2009, including Change 1-27 January 2010, US Department of Defense (DoD).
[14] GSA. 2003. "Progressive Collapse Analysis and Design Guidelines for New Federal Office Buildings and Major Modernization Projects." In. US General Services Administration (GSA).
[15] Neal, Morgan C, Maria EM Garlock, Spencer E Quiel, and Shalva Marjanishvili. 2012. "Effects of fire on a tall steel building designed to resist progressive collapse." In Structures Congress 2012, 246-56.
[16] Quiel, Spencer E, and Shalva M Marjanishvili. 2011. 'Fire resistance of a damaged steel building frame designed to resist progressive collapse', Journal of Performance of Constructed Facilities, 26: 402-09.
[17] Sun, Ruirui, Zhaohui Huang, and Ian W Burgess. 2012. 'Progressive collapse analysis of steel structures under fire conditions', Engineering Structures, 34: 400-13.
[18] Behnam, Behrouz, and Hamid R Ronagh. 2014. 'Behavior of moment‐resisting tall steel structures exposed to a vertically traveling post‐earthquake fire', The Structural Design of Tall and Special Buildings, 23: 1083-96.
[19] Agarwal, Anil, and Amit H Varma. 2014. 'Fire induced progressive collapse of steel building structures: The role of interior gravity columns', Engineering Structures, 58: 129-40.
[20] Mahale, Harshad D, and SB Kandekar. 2016. 'Behaviour of steel structure under the effect of fire loading', International Journal of Engineering Research and Applications, 6: 42-46.
[21] Jiang, Jian, and Guo-Qiang Li. 2017. 'Disproportionate collapse of 3D steel-framed structures exposed to various compartment fires', Journal of Constructional Steel Research, 138: 594-607.
[22] "Iranian National Building Code, part 6, Design Loads for Buildings. Tehran (Iran)." In. 2014. Ministry of Housing and Urban Development (In Persian).
[23] BHRC. 2014. "Iranian code of practice for seismic resistance design of buildings: Standard no. 2800 (4th edition)." In.: Building and Housing Research Center (In Persian).
[24] ETABS16.2.0. 'Extended Three Dimensional(3D) Analysis and design of Building System', Berkeley, California, USA.
[25] MHUD. 2014. "Iranian National Building Code, part 10, steel structure design. Tehran (Iran)." In.: Ministry of Housing and Urban Development (In Persian).
[26] Rackauskaite, Egle, Panagiotis Kotsovinos, and Guillermo Rein. 2017. 'Structural response of a steel-frame building to horizontal and vertical travelling fires in multiple floors', Fire Safety Journal, 91: 542-52.
[27] Standardization, European Committee for. 1994. Eurocode 4: design of composite steel and concrete structures (CEN).
[28] Jiang, Jian, and Asif Usmani. 2013. 'Modeling of steel frame structures in fire using OpenSees', Computers & Structures, 118: 90-99.
[29] ISO-834. 1999. '834: Fire resistance tests-elements of building construction', International Organization for Standardization, Geneva, Switzerland.
[30] Rubert, Achim, and Peter Schaumann. 1986. 'Structural steel and plane frame assemblies under fire action', Fire Safety Journal, 10: 173-84.
[31] Memari, Mehrdad, and Hussam Mahmoud. 2014. 'Performance of steel moment resisting frames with RBS connections under fire loading', Engineering Structures, 75: 126-38.
[32] Kim, Jinkoo, and Taewan Kim. 2009. 'Assessment of progressive collapse-resisting capacity of steel moment frames', Journal of Constructional Steel Research, 65: 169-79.
[33] Vlassis, AG, BA Izzuddin, AY Elghazouli, and DA Nethercot. 2009. 'Progressive collapse of multi-storey buildings due to failed floor.
[34] Kim, Jinkoo, and Young‐Ho Lee. 2010. 'Progressive collapse resisting capacity of tube‐type structures', The Structural Design of Tall and Special Buildings, 19: 761-77.
[35] Committee, AISC. 2016. 'Specification for structural steel buildings (ANSI/AISC 360-16)', American Institute of Steel Construction, Chicago-Illinois.