Evaluation of Micro and Nano-Structure of Process of Cement Hydration in Solidification and Stabilization of Zn Heavy Metal Pollutants at the Presence of Soft Clay

Document Type : Original Research

Author
V. R. Ouhadi
Prof, Faculty of Engineering, Bu-Ali Sina University; Adjunct Prof., School of Civil Engineering, University of Tehran, Iran.
Abstract
Abstract: Introduction: Solidification and stabilization of heavy metal contaminants is recognized as the technology to prevent transfer of contaminants to the lower layers of soil and groundwater. A noticeable increase in distribution of heavy metal contaminants in recent years highlights the importance of effective methods for engineering disposal of industrial wastes. The most important challenge ahead of this endeavor is perhaps the determination of right framework and mechanism of action. Precise mechanism of mobility of contaminants can be grasped by gaining accurate and comprehensive understanding about system behavior and evaluating it from the nano- and micro-structure perspectives. Nano- and micro-sized clay particles can be used effectively as adsorbents of many contaminants (e.g. heavy metal ions and organic compounds) in sewage and wastewater. Moreover, as clay soils have high cation exchange capacity (CEC), they provide appropriate conditions for cation exchange and create considerable capacity to retain heavy metal contaminants. In spite of conducting extensive studies on stabilizing contaminants by the use of cement, inadequate attentions have been paid to microstructure study of interaction process of clay particles, heavy metal ions, and cement, specifically in cement hydration process in different time intervals. Based on this, the present research aims to study the interaction process of clay particles, heavy metal contaminants, and cement over time from the perspective of microstructure. This include the investigation of the effect of presence of heavy metal on cement hydration process and formation of nano-structure calcium silicate hydrate (C-S-H). Material and method: In this study, the behavioral tests were conducted on natural clay soil collected from the Qazvin Plain, Iran. The purpose of this selection was to determine geotechnical-environmental properties and contaminant adsorption-retention capability of samples of natural clay with average specific surface area and CEC and the effects of natural clay on the solidification and stabilization process. The majority of experiments of this study were conducted based on ASTM standards and geotechnical-environmental test guidelines of McGill University (Canada). Density and pH of clay samples were determined in accordance with ASTM, D854 and ASTM, D4972 standards. Soil carbon content was determined by titration. Specific surface area (SSA) of the soil was measured using EGME solution. The cation exchange capacity (CEC) of the soil was determined using 0.1 M barium chloride solution. Meanwhile, different concentrations of heavy metal contaminant (zinc) and different percentages of Portland cement were added to natural clay. The interaction process was analyzed experimentally by examining pH changes and evaluating microstructure study (XRD). Result and discussion: According to laboratory results obtained in this study, the high specific surface area of C-S-H nanostructure improves the adsorption characteristics and leads to better filling of pores. It also improves the retention capability by decreasing the mobility of heavy metal contaminants via encapsulation of their ions (solidification). The results show that formation of C-S-H nanostructure improves absorption features due to high specific surface area and decreases mobility of the heavy metal ions through their encapsulation (solidification). In addition, the presence of the heavy mental contaminant (zinc) reduces formation of C-S-H nanostructure so that the presence of 25 cmol/kg-soil of heavy metal ion (zinc) decreases peak intensity of C-S-H nanostructure about 160 CpS.

Keywords

Subjects

.1. Munehide, I and Luuk K. K, (2016). "Surfactant adsorption to soil components and soils", Advances in Colloid and Interface Science, 231, pp. 59–102.##
2. Ouhadi, V.R., and Amiri, M., (2011). "Geo-environmental Behaviour of Nanoclays in Interaction with Heavy Metals Contaminant", Amirkabir J, Civil, 42, 3, pp. 29-36.##
3. Ouhadi, V.R., Amiri, M., and Goodarzi, A.R., (2012). "The Special Potential of Nano-Clays for Heavy Metal Contaminant ##Retention in Geo-Environmental Projects", Journal of Civil and Surveying Engineering, Vol. 45, pp. 631-642
4. Guozhong. C. and Glen. E. F. (2007). "Environmental Applications of Nanomaterials Synthesis, Sorbents and Sensors". Imperial College Press, pp. 507.##
5. Sevim, İ. and Seniha, F. G., (2005), "Investigation of rheological and colloidal properties of bentonitic clay dispersion in the presence of a cationic surfactant", Progress in Organic Coatings. 54 (1), pp. 28-33.##
6. Lines, M. G.; “Nanomaterials for practical functional uses”, Journal of Alloys and Compounds 449, pp. 242–245, 2008.##
7. Martin, V and Patrik, B. (2016), "Immobilization of Heavy Metals in Natural Zeolite-blended Cement Pastes", Procedia Engineering, 29, pp. 162-169.##
8. Gong, P and Bishop, PL., (2003). "Evaluation of organics leaching from solidification/stabilization hazardous wastes using a powder reactivated carbon additive", Environ. Technol., 24, pp. 445–455.##
9. Conner, J.R., (1990). "Chemical Fixation and Solidification of Hazardous Wastes", Van Nostrand, Reihold, New York.##
10. Desogus, P., Manca, P.P., Orrù, G and Zucca, A. (2013)."Solidification/ stabilization of landfill leachate concentrate using different aggregate materials", Minerals Engineering, 45, pp. 47-54.##
11. Ouhadi, V.R., Yong, R.N., Amiri, M., and Ouhadi, M.H., (2014). "Pozzolanic Consolidation of Soft Clays", Applied Clay Science, Volume 95, pp. 111-118.##
12. Ouhadi, V.R., Goodarzi, A.R., (2007). "Factors Impacting the Electro-Conductivity Variations of Clayey Soils". Iranian Journal of Science and Technology, Vol. 31, No. B2, pp. 109-121.##
13. Reyad, A., Shawabkeh, (2005). "Solidification and stabilization of cadmium ions in sand–cement–clay mixture", J. Hazard. Mater. B, 125, pp. 237–243.##
14. Murat, M.L., Yüksel, Y., (2001). "Potential use of fly ash bentonite mixture as liner or cover as waste disposal areas" Environ. Geol., 40, pp. 1316–1324##
15. Bonen, D. and Shondeep, L.S., (1995), "The effects of simulated environmental attack on immobilization of heavy metals doped in cement-based materials" J. Hazard. Mater, 40, pp. 321–335.##
16. Ouhadi, V.R., and Amiri, M., (2009), “Interaction of Nano-Clays and Cu Contaminant in Geo-Environmental Projects”. 6th Conference Engineering Geology, Tarbiat Modares University, Tehran.##
17. Hong, S.Y. and Glasser, F.P. (2002)."Alkali sorption by C–S–H and C–A–S–H gels – part II. Role of alumina". Cement and Concrete Research 32 (7), pp. 1101–1111.##
18. Malviya, R. and Chaudhary, R. (2006). "Factors affecting hazardous waste solidification/stabilization: a review". Journal of Hazardous Materials 137, pp. 267–276.##
19. Tashiro, C. and Oba, J. (1979). "The effect of Cr2O3, Cu(OH)2, ZnO and PbO on the compressive strength an hydrates of hardened C3A paste". Cement and Concrete Research 9, pp. 253–258.##
20. Taylor, H.F.W. (1993). "Nanostructure of C–S–H: current status". Advanced Cement Based Materials 1, pp. 38–46.##
21. Cannell, B.S., Eghmy, T.T. and Krzow, J.E. (2000). "Heavy metal stabilisation in municipal solid waste combustion bottom ash using soluble phosphate". Waste Management 20, pp. 135–148.##
22. Chen, Q.Y., Hills, C.D. and Tyrer, M. (2007). "Characterisation of products of tricalcium silicate hydration in the presence of heavy metals". Journal of Hazardous Materials 147, pp. 817–825.##
23. Ouhadi, V.R., Amiri, M., Hamidi, S., (2014). “Dispersive soil improvement with lime, special attention to the reduction of peak intensity of clay minerals in XRD analysis”. Modares Civil Engineering journal, pp. 13-25.##
24. Ouhadi, V.R., Amiri, M., Zanganeh, M., (2016). “Microstructural Assessment of Lime Consumption Rate and Pozzolanic Reaction Progress of a Lime-Stabilized Dispersive Soil”. Modares Civil Engineering journal, 16, pp. 11-22.##
25. American Society for Testing and Materials, (1992). "ASTM, 1992 American Society for Testing and Materials, ASTM, Annual Book of ASTM Standards", P.A., Philadelphia V.4, 08.##
26. EPA, (1983), “Process design manual, land application of municipal sludge, Municipal Environmental Research Laboratory”, EPA-625/1-83-016, U.S. Government Printing Offices, New York.##
27. Hesse, P. R., (1971), “A textbook of soil chemical analysis”, William Clowes and Sons, 519p.##
28. Eltantawy and Arnold, I.N., (1973), “Reappraisal of ethylene glycol mono-ethyl ether (EGME) method for surface area estimation of clays”, Soil Sci. 24, pp. 232–238.##
29. Handershot, W. H and Duquette, M., (1986), “A simple barium chloride method for determining cation exchange capacity and exchangeable cations”, Soil Sci. Soc. Am. J. 50, pp. 605–608.##
30. Ouhadi. V.R and Yong. R.N., (2003), “Experimental and theoretical evaluation of impact of clay microstructure on the quantitative mineral evaluation by XRD analysis,”Appl. Clay Sci, 23. Pp. 141-148.##
31. Yong, R. N. and Warkentin, B. P. and Phadangchewit, Y. and Galvez, R., (1990) "Buffer capacity and lead retention in some clay minerals", Water, Air, Soil, Pollution, J., 53, pp. 53-67.##
32. Lumsdon, D.G., Evans, L.J., Bolton, K.A., (1995). “The influence of pH and chloride on the retention of cadmium, lead, mercury and zinc by soils”. Journal of Soil Contamination 4, pp. 137–150.##
33. Yong, R. N. and Phadangchewit, Y., (1993), “pH Influence on selectivity and retention of heavy metals in some clay soils”, Can. Geotech. J., 30, pp. 821-833.##
Modares Civil Engineering journal
Volume 18, Issue 1
May and June 2018
Pages 1-16