Identification of Natural Frequencies Based on a New Enhanced Hilbert-Huang Transform

Authors
Abstract
Hilbert-Huang transform (HHT) consists of two main parts: (1) empirical mode decomposition (EMD) to extract intrinsic mode functions (IMFs) and (2) Hilbert spectral analysis to obtain time-frequency characteristics of the IMFs through the Hilbert transform. Recently, a new enhanced HHT is proposed by the authors in which, two mathematical limitations that restrict the application of the Hilbert transform are circumvented and also an additional smoothing parameter is applied to decrease noise effects on the results. In this paper based on the HHT approach, a simple method for output-only identification of natural frequencies of linear structures is proposed in which HHT or enhanced HHT can be employed. In the proposed method, ambient response data measured at all degrees of freedom of the structure are used to obtain an averaged marginal spectrum. The averaged marginal spectrum is used for identifying the natural frequencies of the structure. In order to validate the effectiveness of the proposed identification method, ambient response data of an arch bridge and a 15-story building are examined. In the first case, the first six natural frequencies of the bridge in vertical direction are extracted. And in the second case, the first three natural frequencies of the building in East-West, North-South and torsional directions are identified. From the results, first, it is found that the enhanced HHT by employing the smoothing parameter is more efficient than the HHT in increasing the readability of the time-frequency-amplitude spectrum and also is capable to provide more accurate amplitude-frequency distribution; second, by comparing results of the proposed method with those obtained from other valid methods, it is concluded that the proposed identification method by using the enhanced HHT is accurately able to estimate the natural frequencies of structures. Regarding to simplicity of the proposed method, it can be applied as an efficient tool for identification of structures or employed to extract changes in frequencies due to occurrences of damages during strong ground motions.

Keywords


[1]    Huang N.E., Shen Z., Long S.R., Wu M.C., Shih H.H., Zheng Q., et al.;”The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series        analysis”; Proc R Soc London Ser A,Vol. 454, pp. 903–995, 1998.
[2]    Yang, J.N., Lei, Y., Pan, S., and Huang, N.E.;“System identification of linear structures based on Hilbert-Huang spectral analysis Part 1: normal modes”; Earthquake Engineering and Structural Dynamics, Vol 32, pp.1443–1467, 2003.
[3]    Yang, J.N., Lei, Y., Lin, S., and Huang, N.E.,;“Identification of natural frequencies and dampings of in situ tall buildings using ambient wind vibration data”; Journal of Engineering Mechanics,Vol. 130, pp. 570–577, 2004.
[1]    Huang, N.E., and Bethesda, M.D. ; “Computing instantaneous frequency by normalizing Hilbert transform”; US Patent 6901353, 2005.
[2]    Yinfeng, D., Yingmin, L., Mingkui, X., Ming, L.A. ;“Analysis of earthquake ground motions using an improved Hilbert-Huang transform”; Journal of Soil Dynamic and Earthquake Engineering,Vol. 28, pp.7–19, 2008.
[3]    N.E. Huan; “Introduction to Hilbert-Huang transform and some recent developments”; in: N.E. Huang, and N.O. Attoh-Okine, (Eds.), The Hilbert-Huang Transform in Engineering, Taylor & Francis, Boca Raton, 2005.
[4]    Flandrin, P., Rilling, G., and Goncalves, P.; “Empirical mode decomposition as a filter bank”, IEEE Signal Proc Let,Vol. 11, pp.112–114, 2004.
[5]    Wu, Z., Huang, N.E.;“A study of the characteristics of white noise using the empirical mode decomposition method”; Proc R Soc London Ser A,Vol. 460, pp 1597–611, 2004.
[6]    Bahar, O., and Ramezani, S.;“Enhanced Hilbert-Huang Transform and Its Application to Modal Identification”; The Structural Design of Tall and Special Buildings, 2012.
[7]   رمضانی، س.؛” ارائه فرایند شناسایی سیستم بر اساس روش جدید ارتقا یافته هیلبرت-هوانگ“؛ پایان نامه کارشناسی ارشد، پژوهشگاه بین المللی زلزله شناسی و مهندسی زلزله، تهران، 1388.
[8]      C. De Boor; A practical guide to splines”; Springer, New York, 1978.
Zong, Z.H., Jaishi, B., Ge, J.P., Ren, W.X.; “Dynamic analysis of a half-through concrete-filled steel tubular arch bridge”; Engineering
[1]      Structures, 27(1), pp. 3–15, 2005.
[2]      Skolnik, D., Lei, Y., Yu, E., Wallace, J.W.; “Identification, model updating, and response prediction of an instrumented 15-story steel-frame building”; Earthquake Spectra,Vol. 22, pp 781–802, 2006.