Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

---

Shear modulus is one of the most important properties of soil deposit that should be evaluated as a preliminary step for site response analysis. Although numerous studies have been conducted to evaluate this parameter for silicate soils, there are considerably less studies on calcareous soils. However, extensive regions of the earth is covered with calcareous soils. This type of soil is typically observed near offshore hydrocarbon industries, such as the Persian Gulf. Calcareous sand is the accumulation of pieces of carbonate materials, originated from reworked shell fragments and skeletal debris of marine organism. These soils typically include huge oil and gas reservoirs which are continuously under an extending construction. Therefore, assessment of dynamic behavior of calcareous soils is a vital step for engineering projects. In this study, shear modulus of calcareous sand are investigated in the range of small and large strains using resonant column and cyclic triaxial tests, respectively. Bulk samples of Boushehr sand were collected from the North bank of the Persian Gulf near the Boushehr port. Preliminary mineralogy tests were conducted in order to estimate carbonate content of the samples. The sand contains considerable level of carbonate content and skeletal structure of the soil can be observed easily. Remolded samples of this sand were prepared via dry deposition method for either triaxial or resonant column tests. The results are presented in terms of shear modulus versus shear strain. The effects of confining pressure and relative density on the shear modulus of the calcareous soil are investigated. Moreover, for evaluating the effect of stress anisotropy on the shear modulus of calcareous soil, dynamic and cyclic tests were conducted under both isotropic and anisotropic conditions. The experimental results confirm that confining pressure has an important influence on the shear modulus of the tested samples. Increase of the mean confining pressure and relative density increases the shear modulus of the sand, as previously reported for the other sands. The results indicate that the effect of stress anisotropy on dynamic properties of calcareous sand is less important than those of mean confining pressure and relative density. With increasing mean confining pressure, the effect of relative density and initial stress anisotropy on the shear modulus increases. The normalized shear modulus are compared with the G-reduction ranges proposed for silicate sand by the previous researchers. This comparison show the need for some modification of the previous proposed ranges for normalized shear modulus curves. Finally, a modified hyperbolic model is presented for estimating the normalized shear modulus of Boushehr calcareous sand. It is demonstrated that the proposed model has more capability for prediction of the experimental G-reduction curves, compared with the models recommended for silicate soils. One advantage of the proposed model is the simple correlation developed for the reference shear strain in terms of initial effective confining pressure. The modified hyperbolic model presented in this study can be employed for site response analysis of the calcareous deposits of the Boushehr city.

Keywords: Calcareous Sand, Shear modulus, Stress Anisotropy, Resonant Column, Cyclic Triaxial

Full-Text [PDF 832 kb]   (4964 Downloads)    

Add your comments about this article : Your username or Email:

---