حدود مجاز جابجایی دیوار گودهای تسلیح شده به روش میخکوبی بر اساس سطوح خرابی سازه های مجاور گود

نویسندگان
دانشگاه تربیت مدرس
چکیده
احتمال خرابی و آسیب به سازه های مجاور محدوده گودبرداری همواره بعنوان یک مسئله چالش برانگیز در طول پایدارسازی دیوار گودبرداری های عمیق با روش "میخکوبی" مطرح بوده است. منشأ این خرابی ها عمدتاً جابجایی های ایجاد شده در دیوارهای گود با پیشرفت گودبرداری است. با این وجود تا کنون ارتباط منطقی بین میزان جابجایی های پیش گفته و میزان خرابی قابل انتظار در سازه های مجاور ارائه نشده است. در این پژوهش سعی گردیده است با تکیه بر10مطالعه موردی و90 تحلیل عددی سه بعدی کالیبره شده و بهره گیری از آنالیزهای احتمالاتی، به ارائه حدود مجاز جابجایی دیوار میخکوبی شده با توجه به احتمال آسیب به سازه های مصالح بنایی واقع در مجاورت گود پرداخته گردد. نتایج این پژوهش ارائه دهنده سطوح خرابی سازه های مجاور گود تحت مقادیر مختلف جابجایی می باشد. سطوح خرابی پیشنهادی دراین مقاله، نشان دهنده "میزان خرابی" محتمل درسازه های مجاور دیوارهای میخکوبی شده، باتوجه به "فاصله سازه" از دیوار گود و حداکثر مقادیر "جابجایی افقی" دیواره گود و با در نظر گرفتن اثرات عمق گود و نوع خاک می باشد.

کلیدواژه‌ها


عنوان مقاله English

Allowable limit of soil nail wall deflection based on damage level of adjacent structures

نویسندگان English

ibrahim naeimifar
shahab yasrobi
ali fakher
Tarbiat Modares University
چکیده English

Damage probability of structures caused by excavation wall movement is an important design aspect of support system in urban areas. This will be more important, if the adjacent structure be old or have low strength parameters. Frame distortion and crack generation are signs of building damage to excavation-induced ground movements which is a challenge in projects involving deep excavations. These highlight the importance of evaluation of building response in excavation projects. The aim of estimation and evaluation of building response is to establish limiting criterion for excavation support system design to certify the structure safety against undesirable damage. Thus, limiting criterion prepares a framework to determine the damage level of building based on excavation induced ground movements. Mentioned limiting criterion also is named Damage criterion or Damage model. Damage models are too practical before design progress of nailing wall. Based on uncertainty in data from excavation project and variability of the many factors that contribute to the response of nearby structures, existing Damage models are rare and generally need special instrumentation of excavation wall and nearby structures, so they cannot prepare a simple framework to use in practical situation. This paper describes a study of building response to excavation-related ground movements and provides procedure for damage assessment of building near excavation projects. This study uses field data based on 10 case studies and 90 calibrated 3D FEM models in addition to probabilistic analysis to establish new simple damage criterion for design consideration of excavation supported by soil nail wall technique. Presented Damage model simply relates the damage level of structure to maximum displacement of excavation wall.To create this paper following stages are used:1.Case studies:31 deep excavation (16.7-31 meters) from expert companies are studied in first stage.2.First filtering of the collected data: part of collected data (14 projects of 27 projects) is eliminated from data base because of inaccuracy in the results of monitoring, unfavorable results in displacement caused by nearby galleries or underground facilities, inappropriate execution and etc. 3.Evaluation of the structures in the excavation-affected zone (EAZ). 4.Second filtering of database: part of first-filtered data is eliminated from data base because of non-deductible conditions of structure in EAZ, mismatch between damage level and results of monitoring and etc. At the end of this stage only ten masonry structures (TMS) were selected to continue case studies. 5.Creating and calibrating FE models: at this stage, FE models are included excavation wall and adjacent structure were extended for each of TMS and were calibrated based on field results. 6.Idealization of calibrated TMS’s FE model (ICTM): each of calibrated TMS’s FE models were modified and idealized by removing water table, modification of excavation condition, simplification of structure frames and etc.7.Development of damage levels: in the last stage, DPI calculated from ICTM for each frame of structure and then compared with the value of excavation wall deflections. Finally, damage levels developed based on resulted database.

کلیدواژه‌ها English

excavation
Nailing
alloable limit of displacement
Damage level
- منابع                                         References
[1] Lazarte, C. A., Victor Elias, P. E., Espinoza, R. D., Sabatini, P. J.,“Soil Nail Walls” Report FHWA0-IF-03-017, Washington, D.C. 20590, (2003),
[2] “Guide to soil nail design and construction”, Civil engineering and development department, the government of the Hong Kong, Geo guide 7, March 2008.
[3] Ghahreman, B., “Analysis of ground and building response around deep excavation in sand”, Ph. D. Thesis, Department of civil eng., uni of Illinois, (2004).
[4] Boscardin, M. D., “Building response to excavation induced movements”, Ph. D. Thesis, Department of civil engineering, university of Illinois, (1980).
[5] Burland, J. B., “Assessment of risk of damage to building due to tunneling and excavation”, Proceeding of the 1th international conference on earthquake geotechnical engineering, IS-Tokyo, (1995).
[6] Laefer, D. F., “Prediction and assessment of ground movement and building damage induced by adjacent excavation, Ph. D. Thesis, Department of civil and environmental engineering,university of Illinois, (2001).
[7] Sawwaf, M. E.  , Nazir, A. K., “The effect of deep excavation-induced lateral soil movements on the behavior of strip footing supported on reinforced sand”, J. Advanced Research, (2011).
[8] Son, M., Cording, E. J., “Estimation of Building Damage Due to Excavation-Induced Ground Movements”, J. Geotechnical and Geoenvironmental Engineering, Vol. 131, No. 2, PP. 162-177, (2005).
[9] Bryson, L. S., Kotheimer, M. J., “Cracking in Walls of a Building Adjacent to a Deep Excavation”, J. performance of construction facilities, Vol. 25, No. 6, PP. 491-503, (2011).
[10] Halim, D., Wong, K. S., “Prediction of Frame Structure Damage due to Deep Excavation”, J. Geotechnical and Geoenvironmental Engineering, ARTICLE IN PRESS.
[11] Yoo, C., Lee, D., “Deep excavation-induced ground surface movement characteristics – A numerical investigation” J. Computers and Geotechnics, 35, PP.  231–252, (2007).
[12] Son, M., Cording, E. J., “Evaluation of Building Stiffness for Building Response Analysis to Excavation-Induced Ground Movements”, J. Geotechnical and Geoenvironmental Engineering, Vol. 133, No. 8, PP. 995-1002, (2007).
[13] Son, M., Cording, E. J., “Responses of Buildings with Different Structural Types to Excavation-Induced Ground Settlements”, J. Geotech. and Geoenvironmental Engineering, Vol. 137, No. 4, PP. 323-333, (2011).
[14] Bryson, L. S., Zapata-Medina, D. J., “Method for Estimating System Stiffness for Excavation Support Walls”, J. Geotech. and Geoen. Eng., ARTICLE IN PRESS.
[15] Burland, J., Broms, B., DeMello, V., “Behavior of foundations and structures: state-of-the-art report”, Proceedings of the 9th international conference on soil mechanics and foundation engineering, Japanese geotechnical society, Tokyo, PP. 495-546, (1977).
[16] Boscardin, M., Cording, E., “Building response to excavation induced settlement”, J. Geotechnical Engineering Division, ASCE, Vol. 115, PP.1-21, (1989).
[17] Son, M., “The response of buildings to excavation-induced ground movements”, PhD thesis, Univ. of Illinois at Urbana-Champaign, Urbana, Ill, (2003).
[18] Hsiao, E., Schuster, M., Juang, C., Kung. G., “Reliability Analysis and Updating of Excavation-Induced Ground Settlement for Building Serviceability Assessment”, J. Geotechnical and Geoenvironmental Engineering, Vol. 134, No. 10, PP. 1448-1458, (2008).
[19] Schuster, M., Kung. G., Juang, C., “Simplified Model for Evaluating Damage Potential of Buildings Adjacent to a Braced Excavation”, J. Geotech. and Geoen. Eng., Vol. 135, No. 12, PP. 1823-1835, (2009).
[20] Juang, C., Schuster, M., Yu Ou, C., Phoon, K., “Fully Probabilistic Framework for Evaluating Excavation-Induced Damage Potential of Adjacent Buildings”, J. Geotechnical and Geoenvironmental Engineering, Vol. 137, No. 2, PP. 130-139, (2011).
[21] Padde. G. N., Linang. J. X., Middleton. J., Equivalent elastic moduli for brick masonry, Journal of Computers and Geotechnics, vol. 8, pp243-265, (1983).
[22] FEMA 356, Chapter 7, “Evaluation of earthquake damaged concrete and masonary wall buildings”, (1998)