Volume 23, Issue 2 (2023)
MCEJ 2023, 23(2): 73-89 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Jami S, Khezrzadeh H. Experimental and Numerical Evaluation of Hybrid Steel-FRP Floor Panels Under Bending Loading. MCEJ 2023; 23 (2) :73-89
URL: http://mcej.modares.ac.ir/article-16-59726-en.html
URL: http://mcej.modares.ac.ir/article-16-59726-en.html
1- Faculty of Civil and Environmental Engineering, Tarbiat Modares University
2- Faculty of Civil and Environmental Engineering, Tarbiat Modares University ,h.khezrzadeh@gmail.com
2- Faculty of Civil and Environmental Engineering, Tarbiat Modares University ,
Abstract: (2095 Views)
In recent decades, new materials have had widespread applications in the construction industry. In the present research, a steel-FRP flooring system is proposed and tested. The implanted experiments are performed in two sections: at first, tests of constituent materials used in composite decks are done, and then full-scale tests of hybrid composite decks are performed. Mechanical tests, including three-point bending, compression, and tensile tests of GFRP profiles, tensile tests of steel plate, shear, and tensile tests of epoxy adhesives, are done with the aim of reaching mechanical properties. Next, flexural tests on four decks are performed. The main variables considered are the length of composite decks, the cold-formed steel channel effect, and the number of GFRP profiles. In examining the composite decks, the fracture between cohesive layers was observed, and damage localization and fracture in profiles occurred. It found that the use of the steel plate increases the stiffness and load-bearing capacity of the decks. The primary failure mode in the experimental work was deboning between profiles and adhesive fracturing in the decks without steel plates. In the decks which are used steel channels, the complete composite action of the structure was observed, resulting in suppressing the debonding phenomenon. The decks with cold-formed steel channels exhibit higher reliability as a result of their ductile behavior. After the tests of composite decks, the composite decks were modeled in the Abaqus software, and the results of the experiments and simulations were compared together. The results of numerical analysis have good agreement with experimental data.
Keywords: Hybrid Composite Decks, FRP Composites, Composite Structures, Experimental Evaluation, Finite Element Analysis, Nonlinear Analysis
Article Type: Original Research |
Subject:
Civil and Structural Engineering
Received: 2022/02/20 | Accepted: 2022/12/14 | Published: 2022/11/1
Received: 2022/02/20 | Accepted: 2022/12/14 | Published: 2022/11/1
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |