Volume 23, Issue 2 (2023)
MCEJ 2023, 23(2): 21-37 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Tolouei I, Maleki A, Lotfollahi-Yaghin M. Evaluation of Cyclic Behavior of Steel Plate Shearwall Equipped with Added Damping and Stiffness (ADAS) Dampers. MCEJ 2023; 23 (2) :21-37
URL: http://mcej.modares.ac.ir/article-16-56878-en.html
URL: http://mcej.modares.ac.ir/article-16-56878-en.html
1- Department of Civil Engineering, Maragheh Branch, Islamic Azad University, Maragheh, Iran
2- Assistant Professor, Department of Civil Engineering, Maragheh Branch, Islamic Azad University, Maragheh, Iran ,A.maleki@iau-maragheh.ac.ir
3- Professor, Department of Civil Engineering, University of Tabriz, Tabriz, Iran
2- Assistant Professor, Department of Civil Engineering, Maragheh Branch, Islamic Azad University, Maragheh, Iran ,
3- Professor, Department of Civil Engineering, University of Tabriz, Tabriz, Iran
Abstract: (1097 Views)
In the present study, the cyclic behavior of steel plate shear wall of a three-story steel frame equipped with added damping and stiffness (ADAS) dampers was evaluated. In this study, with the aim of investigating and improving the performance of the steel plate shear wall against lateral forces, the proposed dampers were applied in the distance between the columns and the steel plate shear wall infill plates. The parameters studied include the thickness of the damper sheet (8, 10, 12, 14 and 16 mm) and the thickness of the infill plate (3, 4, 5 and 6 mm) respectively. Evaluation of cyclic behavior of steel plate shear wall was performed using finite element method via ABAQUS software and the loading protocol based on ATC-24 was applied. In order to verify, the experimental specimen was simulated by ABAQUS software and it was observed that the experimental specimen and the finite element model are in good conformation and the finite element model can be applied to study and compare the parameters considered in this study such as energy dissipation, strength, stiffness and ductility. The results showed that as the thickness of the damper sheet increased, the energy consumption in the steel plate shear wall system increased from 12 to 66 percent compared to the model without dampers. Also, by reducing and increasing the thickness of the infill plates in the second and third floors compared to the model without dampers, we saw an increase in energy consumption from 52 to 64 percent compared to the model without dampers, which indicates the good performance of the dampers. The strength of the steel plate shear wall system increased from 2.40 to 3.14 times by considering different thicknesses for the damper compared to the model without damper, and further by considering the infill plates for the steel plate shear wall system. We saw an increase in strength from 2.30 to 2.81 times compare to the model without damper. The stiffness level of each steel plate shear wall model was investigated and compared, and we saw an increase in stiffness from 76 to 99 percent compared to the model without damper. Also, considering the thickness of different infill plates for the steel plate shear wall system, the stiffness increased from 82 to 98 percent compared to the model without damper. As the thickness of the damper sheets increased, the ductility increased from 2.32 to 2.55 times compare to the model without damper. Also, considering the thickness of different infill plates for the steel plate shear wall system, we saw an increase in strength from 2.29 to 2.55 times compare to the model without damper. Further, by examining the hysteresis curves and the hysteresis damping ratio of different models, it was evident that the models equipped with dampers are significantly superior to the models without dampers, and as the thickness of the dampers increased, the area under the curve of each model increased. As a result, the larger this level is, it indicates that the member is more malleable and has the ability to absorb more energy. Finally, the performance of the proposed dampers was investigated along with the damper failure mechanism. The results showed that ADAS dampers with their special deformations, significantly increase energy consumption and make the steel plate shear wall more malleable and by absorbing a large amount of energy they reduced the force applied to the main components and prevented the destruction of the steel plate shear wall.
Article Type: Original Research |
Subject:
Earthquake
Received: 2021/11/2 | Accepted: 2022/12/17 | Published: 2023/05/31
Received: 2021/11/2 | Accepted: 2022/12/17 | Published: 2023/05/31
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |