Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

---

Response modification factors are used to reduce the lateral loads in "force-based design" method. Naturally the calculated lateral displacement (drift) of the structures in the linear static analyses is smaller than actual values. Hence, deflection amplification factor (C_d) is needed to consider a realistic estimation of nonlinear displacements. Most seismic design codes such as ASCE7 and standard No. 2800- 4^th version propose this factor for different lateral bearing systems. This paper evaluates the proposed deflection amplification factor for dual system of special reinforced concrete moment-resisting frame with/without shear wall. For this purpose, a set of 2D reinforced concrete frames with 3, 7 and 11 story are designed based on standard No. 2800 (4^th version) and implemented in Opensees software in each case without considering the soil- foundation- structure interaction. In this regard, beams and columns are modeled using concentrated plasticity method with “Elastic Beam Column Element” in the middle and “Zerolength Element” at the end of elements. Moreover, “SFI-MVLEM” element is used for modeling of shear walls. Nonlinear behavior in two ends of the beams and columns is assigned by “Modified Ibarra- Medina- Krawinkler Deterioration Model with Peak-Oriented Hysteretic Response” model which has been developed by Ibarra et al. (2005). This model is defined using the proposed equations by Haselto et al. (2007). Uniaxial behavior of steel reinforcements and concrete sections are simulated by Steel02 and ConcreteCM, respectively. Studied frames are verified using Hatzigeorgiou and Liolios (2010) and Liu et al. (2020) study for special moment-resisting frame with/without shear wall, respectively. In addition to linear static analysis (LSA), linear and nonlinear dynamic analyses (LDA and NDA) are applied to 3, 7 and 11 story frames with two lateral bearing systems. In this regard, 22 far-field ground motion records which have been introduced in FEMA P695 are used as seismic scenarios. These records are scaled based on Standard No. 2800 to have identical spectral acceleration with the design spectrum for the fundamental period (T) of each studied frames. For this purpose, each record is normalized to its peak ground acceleration and records are scaled so that the average acceleration spectrum of all records was above the design spectrum in 0.2T to 1.5T range. In order to evaluate the deflection amplification factor and C_d/R, maximum drift of roof and other stories is used for each frames due to concentration of structural damage in certain floors of a multi-story structures and, consequently, creating larger lateral displacements in those floors. The calculated C_d coefficients are compared to the proposed values in ASCE7 and standard No. 2800 (4^th version) for all special reinforced concrete moment-resisting frames with/without shear wall. This comparison shows that the C_d coefficients which have been proposed in above-mentioned seismic design codes are not appropriate and more realistic estimate of the structural performance in earthquake has demanded larger C_d values. Moreover, C_d and C_d/R values are changed with the height of special reinforce concrete frames with/without shear wall. Finally, adequate values of deflection amplification factors are proposed for these frames with/without shear wall in this paper.

Keywords: Deflection Amplification Factor, Special Moment-Resisting Frames, Special Shear Wall, Linear Dynamic Analysis, Nonlinear Dynamic Analysis

Full-Text [PDF 922 kb]   (820 Downloads)    

Add your comments about this article : Your username or Email:

---

---