Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

---

Seismic design codes provide different equations for estimating displacement demands in various buildings and structures. Such equations were usually obtained by performing regression analysis over the obtained data from numerical models under different nonlinear analyzes. On the other hand, the application of artificial earthquakes is allowed to be considered for design and demand assessment in structures when there is a lack of suitable ground motions for a specific region and site. Since the accuracy of such relations affects the reliability of demand estimating in structures, it is required to assess the efficiency of such predictive relations. Moreover, it is essential to assess the efficiency of those relations for artificially generated earthquakes. Hence, in this study, the estimated demands from the design and assessment codes relations are evaluated for artificially generated ground motions. In this regard, regulations in the fourth edition of the Iranian seismic design code (also known as Standard 2800) and the last revision of the Iranian seismic evaluation code of practice (also known as Code-360) are considered. Estimated demands from these codes are compared to the results from the nonlinear time-history analysis of a group of single degree of freedom (SDOF) systems. Although an SDOF system can not represent the complete behavior of a complex building, for the low to medium-rise buildings with a fundamental vibration first mode, such an idealization is acceptable. In this regard, a group of SDOF systems with the elastic-perfectly-plastic (EPP) nonlinear behavior was considered. SDOF systems have vibration periods between 0.1s to 2.0s (as low to medium-rise buildings) with strength reduction factors (R_μ) of 2 to 8 to cover most of the common lateral resisting systems. These systems were analyzed under the action of 24 artificially generated ground motion records. Earthquake records were generated based on three different envelop shapes including compound shape, exponential shape, and Saragoni and Hart shape. These envelop shapes are representing the general form of an earthquake accelerogram and try to impose the real characteristics of an earthquake on the generated record. After employing the time-history analysis on each SDOF system, the mean of the maximum displacement demands of SDOF systems was obtained and compared to those from the estimating equations in Standard 2800 and Code-360. It is observed that estimated demands from Standard 2800 are closer to those from time-history analysis when compared with the obtained results from Code-360. Among the considered strength reduction factors, it was observed that SDOF systems with larger R_μ lead to a higher difference between the time-history results and those from codes. This is more predominant over the period range of 0.1s to 0.8s. So, relations in both codes are required to be modified for better demand estimating. In this regard, a method is proposed for modifying the available equations in the prementioned codes to accurately predict the displacement demands in systems under the action of artificially generated ground motions. A comparison between the results from the modified equations and those from the nonlinear time-history analysis shows the efficiency of the proposed method.

Keywords: Artificial ground motion, Envelop function, Time-history analysis, Demand estimation, Single degree of freedom system

Full-Text [PDF 1727 kb]   (1693 Downloads)    

Add your comments about this article : Your username or Email:

---

---