Volume 13, Issue 2 (2013)
MCEJ 2013, 13(2): 95-104 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Shojaeizadeh A, Ghodsian M, Salehi Neyshaboori A, Safarzadeh A. Effects of Bed Roughness on Turbulent Characteristics of a Three-Dimensional Wall Jets. MCEJ 2013; 13 (2) :95-104
URL: http://mcej.modares.ac.ir/article-16-5041-en.html
URL: http://mcej.modares.ac.ir/article-16-5041-en.html
1- Tarbiat Modares University
2- University of Mohaghegh Ardabili
2- University of Mohaghegh Ardabili
Abstract: (5954 Views)
Abstract:
In this paper the experimental study of the flow pattern around a round wall jet has been carried out to investigate the effect of the bed roughness on the turbulence characteristics, including Reynolds stress and turbulence intensities. Measurements were conducted using the three-dimensional velocimeter, ADV and time series of the velocity components are used to investigate the variation of the turbulent flow parameters along the measuring domain. The results showed that by increasing the bed roughness, the streamwise and vertical turbulence intensities increase by downstream distance and for a specific bed roughness the streamwise turbulence intensity is higher than the vertical one. Furthermore, by going downstream from the jet entrance the bed shear stress reduces and by increasing the bed roughness, the bed shear stress has an increasing trend along the jet centerline. Location of the maximum bed shear stress does not change by changing the bed roughness.
Received: 2013/08/18 | Accepted: 2013/04/21 | Published: 2013/08/18
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |