کنترل بافتینگ ناشی از باد در پل های معلق با دهانه بلند با استفاده از سیستم های بهینه و نوآورانه کنترلی نیمه‌فعال

نوع مقاله : پژوهشی اصیل (کامل)

نویسندگان
1 دانشگاه گیلان، دانشکده فنی، گروه عمران، رشت، ایران
2 دانشگاه گیلان، دانشکده فنی، گروه مهندسی عمران
10.48311/mcej.2026.119632.82909
چکیده
پل‌های معلق با دهانه‌های بلند به دلیل انعطاف‌پذیری‌شان، در برابر ارتعاشات ناشی از باد مانند بافتینگ آسیب‌پذیر هستند و این امر ضرورت به‌کارگیری راه‌کارهای کنترلی پیشرفته را برای کاهش پاسخ‌های سازه‌ای ایجاب می‌کند. در این پژوهش، ارتعاش بافتینگ پل گلدن گیت توسط میراگرهای نیمه فعال مگنتورئولوژیکی متصل به عرشه با پیکربندی نوآورانه، با استفاده از سیستم کنترل منطق فازی بهینه شده توسط الگوریتم‌های بهینه‌سازی فراابتکاری گرگ خاکستری و پژواک‌یابی دلفین کنترل می‌شود. سه پیکربندی سیستم کنترل در محدوده‌های گوناگون سرعت باد مورد ارزیابی قرار می‌گیرند. نتایج محاسباتی نشان می‌دهد که پاسخ‌های جابجایی در سرعت‌های پایین باد ناچیز باقی می‌مانند، اما در سرعت‌های بالاتر، که میراگرهای مگنتورئولوژیکی به دلیل ویژگی‌های مرتبط با سرعت خود به حداکثر اثربخشی می‌رسند، رشد نمایی نشان می‌دهند. پیکربندی با ۴ میراگر، شامل دو میراگر واقع در دهانه مرکزی و دو میراگر نزدیک برج‌ها، به عنوان راه‌حلی بهینه انتخاب شده است و به کاهش قابل توجهی در پاسخ‌های بیشینه دست می‌یابد. برای سرعت‌های متوسط باد، پیکربندی با ۳ میراگر کفایت می‌کند. سیستم با ۴ میراگر، راه حلی کارآمد برای کنترل بهینه در سرعت‌های بالای باد ارائه می‌دهد. سیستم پیشنهادی که ترکیبی از پیکربندی نوآورانه میراگر مگنتورئولوژیکی و کنترل‌کننده بهینه است، در کاهش پاسخ‌های بافتینگ بسیار مؤثر عمل می‌کند. این قابلیت برای به حداقل رساندن خطر خرابی در پل های معلق با دهانه بلند ضروری است.
کلیدواژه‌ها
موضوعات

عنوان مقاله English

Buffeting control in long-span suspension bridges using optimized and innovative semi-active control systems

نویسندگان English

shaghayegh abbasi 1
Saeid Pourzeynali 2
1 Dpt. of Civil Engineering, Faculty of Engineering, University of Guilan. Rasht, Iran.
2 Department of Civil Engineering, Faculty of Engineering, University of Guilan
چکیده English

Long-span suspension bridges are vulnerable to wind-induced vibrations such as buffeting due to their flexibility, necessitating advanced control solutions to mitigate structural responses. Prolonged exposure to such vibrations can lead to fatigue damage over time and discomfort for users. Effective control strategies are essential for long-term structural performance. Control systems are vital for structures to withstand repeated vibrations and aerodynamic loading throughout their design life without experiencing excessive degradation or loss of functionality. In this research, the buffeting vibration of the Golden Gate bridge is controlled by Magneto-Rheological (MR) dampers attached to the deck in an innovative configuration, using a fuzzy logic control system optimized by the Gray Wolf Optimizer (GWO) and Dolphin Echolocation (DE) metaheuristic optimization algorithms. The selection of these specific algorithms is motivated by their strong ability to handle complex nonlinear optimization problems and their successful application in various structural engineering contexts. Fuzzy logic controllers are mainly designed to generate appropriate command signals for the MR dampers, with their membership functions and rule base optimized through the metaheuristic algorithms to achieve superior control performance of the system. The fuzzy inference system interprets real-time structural response data, including displacement and velocity at the places where MR dampers are installed along the bridge deck, to determine the required and optimized voltage at each time step. This continuous monitoring and adjustment process enables the control system to adapt instantaneously to changing wind conditions and structural behavior. Three control system configurations are evaluated under different wind velocities, ranging from low to extreme (0 to 40 m/s) wind events that the suspension bridge may encounter during its service life. Evaluating system performance across this thorough range shows the robustness of each control configuration under different wind conditions. Computational results demonstrate that displacement responses of the bridge remain negligible under low wind velocities but show exponential growth at higher velocities, where MR dampers reach peak effectiveness due to their velocity-related characteristics. This behavior is consistent with the fundamental properties of MR dampers, which generate damping forces proportional to the relative velocity of the damper, making them particularly effective when structural vibrations become greater under higher wind loads. The 4-damper configuration, with two dampers located at the central span and two near the towers, is selected as an optimal solution, achieving a significant reduction in peak responses. For moderate wind velocities, the 3-damper configuration suffices, offering a practical and economical solution. The results confirm that the 4-damper arrangement offers a robust solution for optimal control of higher wind velocities, demonstrating its capability to maintain structural serviceability even under extreme aerodynamic loading. The proposed integrated structural control system, which combines novel MR damper installations with an optimized real-time controller, proves highly effective in suppressing buffeting responses of the long-span suspension bridges. This capability is essential for ensuring serviceability and minimizing failure risk in long-span transportation infrastructure. The findings of this research contribute to the advancement of smart structural control and provide valuable insights for the design of semi-active vibration mitigation systems in future long-span suspension bridges.

کلیدواژه‌ها English

Buffeting control
MR dampers
Metaheuristic optimization (GWO&‌DE)
Long-span suspension bridges

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 26 آبان 1405