تحلیل ارتعاش آزاد جانبی و محوری تیرهای غیریکنواخت به روش سری‌های توانی

نوع مقاله : پژوهشی اصیل (کامل)

نویسندگان
1 دانشکده فنی مهندسی دانشگاه پیام نور
2 دانشگاه صنعتی نوشیروانی بابل
10.48311/mcej.2026.122995.82947
چکیده
در پژوهش حاضر، ارتعاش آزاد جانبی و محوری تیرهای طره غیریکنواخت با تغییرات خطی سطح مقطع، با استفاده از روش سری توانی و براساس نظریه‌های اویلر-برنولی و رایلی بررسی شده‌است. به‌دلیل تغییرات پیوسته‌ی سطح مقطع، معادلات دیفرانسیل حاکم دارای ضرایب متغیر بوده و حل به-فرم بسته‌ی آنها، به‌جز در موارد خاص، امکان‌پذیر نیست. ازاین‌رو، معادلات به حوزه‌ی فرکانس منتقل شده و با فرض پاسخ سری توانی، ضرایب مجهول از روابط بازگشتی تعیین شده‌اند. اعمال شرایط مرزی به معادله‌ی مشخصه‌ای منجر شده که حل آن، فرکانس‌های طبیعی تیر را مشخص می‌کند. هم‌ارزی تحلیلی روش سری توانی با پاسخ‌های دقیق توابع بسل در نظریه‌ی اویلر-برنولی و صحت‌سنجی نتایج، اعتبار این روش را تأیید می‌کند. نتایج نشان می‌دهد در مودهای بالاتر ارتعاش جانبی، نظریه‌ی اویلر-برنولی با خطای قابل‌توجهی نسبت به نظریه‌ی رایلی همراه است؛ به‌طوری‌که در مود پنجم، این اختلاف به‌حدود ۴۳٪ می‌رسد. این خطا ناشی از نادیده‌گرفتن اینرسی دورانی است که در مودهای بالاتر، به برآورد دست‌بالای فرکانس‌ها می‌انجامد. در ارتعاش محوری، به‌دلیل تأثیر کمتر اینرسی دورانی، اختلاف دو نظریه به‌حدود ۴٪ در مود پنجم می‌رسد. نتایج همچنین گویای آن است که همگرایی شکل‌مودهای جانبی در مودهای پایین‌تر با جملات کمتری حاصل می‌شود، ضمن اینکه این همگرایی در ارتعاش محوری با سرعت بیشتری صورت می‌پذیرد. از مزایای اصلی روش سری توانی می‌توان به همگرایی سریع، کنترل دقت با افزایش تعداد جملات، کاهش هزینه‌ی محاسباتی و انعطاف‌پذیری بالا در برابر تغییرات مقطع و شرایط مرزی اشاره کرد که آن را به ابزاری کارآمد برای تحلیل تیرهای غیریکنواخت تبدیل می‌سازد.
کلیدواژه‌ها
موضوعات

عنوان مقاله English

Free Vibration Analysis of Lateral and Axial Non-Uniform Beams Using the Power Series Method

نویسندگان English

Leila Khanmohammadi 1
Bahram Navayi Neya 2
1 Faculty of Engineering, Payame Noor University
2 Babol Noshirvani University of Technology
چکیده English

This study presents a comprehensive analytical investigation into the free lateral and axial vibrations of linearly tapered non-uniform beams using the power series method, within the frameworks of both Euler–Bernoulli and Rayleigh beam theories. Due to the varying cross-section, the governing differential equations possess variable coefficients, making direct analytical solutions challenging. The equations are transformed into the frequency domain by assuming harmonic motion, and the displacement fields are approximated using infinite power series expansions. The unknown constant coefficients are determined through recursive relations derived from substituting the series into the governing equations. By applying fixed-free boundary conditions, a characteristic equation is established, the solution of which yields the natural frequencies. An analytical equivalence is demonstrated between the power series method and the exact Bessel function solutions within the Euler–Bernoulli framework, confirming that the power series is essentially a series expansion of the Bessel solutions, converging to them as the number of terms approaches infinity. This equivalence validates the method's accuracy in computing both natural frequencies and corresponding mode shapes. The numerical validation further confirms this high precision, with differences of approximately 0.05% and 0.2% for lateral and axial vibrations, respectively, compared to exact solutions.

A comprehensive sensitivity analysis determines the optimal number of series terms required for convergence. The power series method achieves full convergence with 8 terms for lateral vibration and 5 terms for axial vibration in the fundamental mode. Considering that the first five vibration modes are investigated in this study, the optimal number of terms for lateral vibration is determined as 24 and 32 for the Euler–Bernoulli and Rayleigh theories, respectively, while for axial vibration, the corresponding values are 21 and 16 terms. This indicates that higher modes, particularly within the Rayleigh theory framework, require more terms to achieve necessary accuracy. In addition to natural frequencies, the power series method can readily determine the corresponding mode shapes. Mode shapes also converge rapidly, with 8 terms for the first mode, 12 for the second, and 24 for the fifth mode, reflecting the increasing complexity of higher modes.

The comparative analysis between the two beam theories reveals that in higher transverse modes, the Euler–Bernoulli theory exhibits considerable error compared to the Rayleigh theory, reaching about 43% at the fifth mode. This difference comes from neglecting rotary inertia, which increasingly overestimates natural frequencies as curvature intensifies in higher modes. In axial vibration, however, due to the independence of axial deformations from rotary inertia, the difference between the two theories remains at most around 4.2%. The performance of the power series method is also compared with that of the Galerkin method [24]. The results indicate that the power series method, due to its flexibility in selecting the number of series terms, as well as its reduced computational cost and time, exhibits superior accuracy and efficiency compared to the Galerkin method, particularly in higher vibration modes.

The power series method offers a unified analytical framework that accurately determines natural frequencies of both transverse and axial free vibrations of non-uniform beams, while requiring significantly less computational effort than conventional approaches. Additional advantages include rapid convergence, high accuracy, and the ability to control precision by simply increasing the number of series terms. These features make this method a highly efficient and reliable analytical tool for free vibration analysis of non-uniform beams, with considerable applications in engineering structures such as concrete gravity dams, wind turbine towers, and other tapered structural components where accurate frequency predictions are essential for design and performance evaluation. The method's flexibility in handling arbitrary cross-sectional variations and various boundary conditions further enhances its practical utility in structural dynamics.

کلیدواژه‌ها English

Non-uniform beam
Free vibration
Power series method
Euler-Bernoulli theory
Rayleigh theory
Bessel functions
Rotary inertia

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 26 آبان 1405