[1] Shen, L., Zhang, L., Yang, X., Di Luzio, G., Xu, L., Wang, H., & Cao, M. (2024). Multiscale cracking pattern-based homogenization model of water permeability in hybrid fiber-reinforced concrete after high-temperature exposure. Journal of Building Engineering, 84, 108643.
[2] Zhang, G., Zheng, H., Wei, X., Li, Z., Yan, Z., & Chen, X. (2024). Concrete mechanical properties and pore structure influenced by high permeability water pressure. Developments in the Built Environment, 100385.
[3] Zeng, W., Wang, W., Pan, J., & Liu, G. (2023). Effect of steel fiber on the permeability of freeze-thaw damaged concrete under splitting tensile and compressive loads. Journal of Building Engineering, 80, 108086.
[4] Zeng, W., Zhao, X., Zou, B., & Chen, C. (2023). Topographical characterization and permeability correlation of steel fiber reinforced concrete surface under freeze-thaw cycles and NaCl solution immersion. Journal of Building Engineering, 80, 108042.
[5] Zhang, J., Zhou, L., Nie, Q., Wu, H., & Wu, L. (2024). Effects of calcium sulfate whiskers and basalt fiber on gas permeability and microstructure of concrete. Construction and Building Materials, 411, 134369.
[6] Yang, J., Dong, Q., Chen, X., Shi, B., & Wang, X. (2024). Evaluation of concrete surface permeability: A dynamic water film-based approach. Measurement, 224, 113863.
[7] Yildirim, M., & ÖZHAN, H. B. (2023). Effect of permeability-reducing admixtures on concrete properties at different cement dosages. Journal of Innovative Science and Engineering, 7(1), 48-59.
[8] Powers, T. C. (1945, January). A working hypothesis for further studies of frost resistance of concrete. In Journal Proceedings (Vol. 41, No. 1, pp. 245-272).
[9] Tian, J., Wang, W., & Du, Y. (2016). Damage behaviors of self-compacting concrete and prediction model under coupling effect of salt freeze-thaw and flexural load. Construction and Building Materials, 119, 241-250.
[10] Wang, B., Pan, J., Fang, R., & Wang, Q. (2020). Damage model of concrete subjected to coupling chemical attacks and freeze-thaw cycles in saline soil area. Construction and Building Materials, 242, 118205.
[11] Zhang, D., Mao, M., Zhang, S., & Yang, Q. (2019). Influence of stress damage and high temperature on the freeze–thaw resistance of concrete with fly ash as fine aggregate. Construction and Building Materials, 229, 116845.
[12] Qiu, W. L., Teng, F., & Pan, S. S. (2020). Damage constitutive model of concrete under repeated load after seawater freeze-thaw cycles. Construction and Building Materials, 236, 117560.
[13] Ren, J., & Lai, Y. (2021). Study on the durability and failure mechanism of concrete modified with nanoparticles and polypropylene fiber under freeze-thaw cycles and sulfate attack. Cold Regions Science and Technology, 188, 103301.
[14] Polat, R., Qarluq, A. W., & Karagöl, F. (2021). Influence of singular and binary nanomaterials on the physical, mechanical and durability properties of mortars subjected to elevated temperatures and freeze–thaw cycles. Construction and Building Materials, 295, 123608.
[15] Zhang, B., Yan, B., & Li, Y. (2023). Study on mechanical properties, freeze–thaw and chlorides penetration resistance of alkali activated granulated blast furnace slag-coal gangue concrete and its mechanism. Construction and Building Materials, 366, 130218.
[16] Jiang, W. Q., Shen, X. H., Xia, J., Mao, L. X., Yang, J., & Liu, Q. F. (2018). A numerical study on chloride diffusion in freeze-thaw affected concrete. Construction and Building Materials, 179, 553-565.
[17] Li, L. J., Liu, Q. F., Tang, L., Hu, Z., Wen, Y., & Zhang, P. (2021). Chloride penetration in freeze–thaw induced cracking concrete: A numerical study. Construction and Building Materials, 302, 124291.
[18] Linjie, L. I., & Qingfeng, L. I. U. (2022). Freezing rate and chloride transport in concrete subjected to freeze-thaw cycles: A numerical study. Journal of the Chinese Ceramic Society, 50(8), 2245-2256.
[19] Zhang, M., Yang, L. M., Guo, J. J., Liu, W. L., & Chen, H. L. (2018). Mechanical properties and service life prediction of modified concrete attacked by sulfate corrosion. Advances in Civil Engineering, 2018, 1-7.
[20] Mandelbrot, B. B., & Mandelbrot, B. B. (1982). The fractal geometry of nature (Vol. 1). New York: WH freeman.
[21] Xuan, W., Chen, X., Yang, G., Dai, F., & Chen, Y. (2018). Impact behavior and microstructure of cement mortar incorporating waste carpet fibers after exposure to high temperatures. Journal of Cleaner Production, 187, 222-236.
[22] Zhang, B., & Li, S. (1995). Determination of the surface fractal dimension for porous media by mercury porosimetry. Industrial & Engineering Chemistry Research, 34(4), 1383-1386.
[23] Gao, Y., Jiang, J., De Schutter, G., Ye, G., & Sun, W. (2014). Fractal and multifractal analysis on pore structure in cement paste. Construction and Building Materials, 69, 253-261.
[24] Chen, X., Zhou, J., & Ding, N. (2015). Fractal characterization of pore system evolution in cementitious materials. KSCE Journal of Civil Engineering, 19, 719-724.
[25] Ma, H., Sun, J., Wu, C., Yi, C., & Li, Y. (2020). Study on the pore and microstructure fractal characteristics of alkali-activated coal gangue-slag mortars. Materials, 13(11), 2442.
[26] Han, X., Wang, B., & Feng, J. (2022). Relationship between fractal feature and compressive strength of concrete based on MIP. Construction and Building Materials, 322, 126504.
[27] Naderi، M. (2010); ‘Determination of concrete، stone، mortar، brick and other construction materials permeability with cylindrical chamber method’، Registration of patent in Companies and industrial property Office، Reg. N. 67726، Iran.
[28] Naderi, M., & Kaboudan, A. (2021). Experimental study of the effect of aggregate type on concrete strength and permeability. Journal of Building Engineering, 37, 1-11.
[29] BS EN 12390-8, (2009). Testing Hardened Concrete. Depth of Penetration of Water under Pressure, British Standards Institution, London.
[30] Naderi, M., & Kaboudan, A. (2020). Cylindrical Chamber: A New In Situ Method for Measuring Permeability of Concrete with and without Admixtures. Journal of Testing and Evaluation, 48(3), 2225-2241
[31] ASTM C1583/C1583M, “Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair Overlay Materials by Direct Tension (Pull-off Method)”, American Society for Testing and Materials, (2013).
[32] Pereira. E., Medeiros. M.H.F. Pull off Test to Evaluate the Compressive Strength of Concrete: an Alternative to Brazilian Standard Techniques. Ibracon Structures and Materials Journal. 5(6) (2012) 757-780.
[33] ASTM C128-15 (ASTM 2015); Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate. ASTM International, West Conshohocken, PA.
[34] ASTM C127-15 (ASTM 2015); Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate. ASTM International, West Conshohocken, PA.
[35] ASTM C136-19 (ASTM 2019); Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates. ASTM International: West Conshohocken, PA, USA.
[36] Giancaspro, J., Millman, L., Goolabsingh, R., MacDonald, K., & Yang, Q. D. A Novel Bearing Swivel Joint and a Universal Joint for Concrete Pull-Off Testing Using a Material Testing Machine. ASTM International. (2014).
[37] ASTM C666/C666M-22. (ASTM 2022); Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, ASTM International, West Conshohocken, PA.
[38] Yu, B., & Li, J. (2001). Some fractal characters of porous media. Fractals, 9(03), 365-372.
[39] Patro, D., Bhattacharyya, S., & Jayaram, V. (2007). Flow kinetics in porous ceramics: understanding with non‐uniform capillary models. Journal of the American Ceramic Society, 90(10), 3040-3046.
[40] Xu, P. and Yu, B., 2008. Developing a new form of permeability and Kozeny–Carman constant for homogeneous porous media by means of fractal geometry. Advances in water resources, 31(1), pp.74-81.
[41] Kozeny, J., 1927. Ueber kapillare leitung des wassers im boden. Sitzungsberichte der Akademie der Wissenschaften in Wien, 136, 271.
[42] Carman, P. C., 1937. Fluid flow through granular beds. Trans. Inst. Chem. Eng. London, 15, 150-156.
[43] Corte, A.E., 1962. Vertical migration of particles in front of a moving freezing plane. Journal of Geophysical Research, 67(3), pp.1085-1090. https://doi.org/10.1029/JZ067i003p01085
[44] Zeng, Q., Li, K., Fen-chong, T. and Dangla, P., 2010, June. A study of the behaviors of cement-based materials subject to freezing. In 2010 International Conference on Mechanic Automation and Control Engineering (pp. 1611-1616). IEEE. DOI: 10.1109/MACE.2010.5535987
[45] Yuan, J., Du, Z., Wu, Y. and Xiao, F., 2019. Freezing-thawing resistance evaluations of concrete pavements with deicing salts based on various surfaces and air void parameters. Construction and Building Materials, 204, pp.317-326. https://doi.org/10.1016/j.conbuildmat.2019.01.149
[46] Özcan, F. and Koç, M.E., 2018. Influence of ground pumice on compressive strength and air content of both non-air and air entrained concrete in fresh and hardened state. Construction and Building Materials, 187, pp.382-393. https://doi.org/10.1016/j.conbuildmat.2018.07.183
[47] Valenza II, J.J. and Scherer, G.W., 2007. A review of salt scaling: II. Mechanisms. Cement and Concrete Research, 37(7), pp.1022-1034. https://doi.org/10.1016/j.cemconres.2007.03.003
[48] Wei, J., Chen, Z., Liu, J., Liang, J., & Shi, C., 2023. Review on the characteristics and multi-factor model between pore structure with compressive strength of coral aggregate. Construction and Building Materials, 370, 130326.
[49] Zeng, Q., Li, K., Fen-chong, T. and Dangla, P., 2010, June. A study of the behaviors of cement-based materials subject to freezing. In 2010 International Conference on Mechanic Automation and Control Engineering (pp. 1611-1616). IEEE. DOI: 10.1109/MACE.2010.5535987
[50] Yu, B. and Cheng, P., 2002. A fractal permeability model for bi-dispersed porous media. International journal of heat and mass transfer, 45(14), pp.2983-2993. https://doi.org/10.1016/S0017-9310(02)00014-5
[51] Chen, Y. and Xu, Y.F., 2019. Compressive strength of fractal-textured foamed concrete. Fractals, 27(01), p.1940003. https://doi.org/10.1142/S0218348X19400036
[52] Kim, J. and Choi, S., 2023. Fractal-based microstructure reconstruction to predict the permeability of cement pastes. Construction and Building Materials, 366, p.130157.
[53] Xu, P. (2015). A discussion on fractal models for transport physics of porous media. Fractals, 23(03), 1530001.
[54] Wheatcraft, S. W., & Tyler, S. W. (1988). An explanation of scale‐dependent dispersivity in heterogeneous aquifers using concepts of fractal geometry. Water Resources Research, 24(4), 566-578.
[55] Liu, H., Xie, Z., Yu, R., & Zhang, N. (2022). A New Three-dimensional Fractal Dimension Model to Describe the Complexity of Concrete Pores. Journal of Advanced Concrete Technology, 20(3), 127-138.
[56] Torrent, R.J., Neves, R.D. and Imamoto, K.I., 2021. Concrete permeability and durability performance: from theory to field applications. CRC Press. https://doi.org/10.1201/9780429505652
[57] Naderi, M., Kaboudan, A.R., & Amin Afshar, M., 2020. STUDYING THE STRENGTH AND DIFFUSION AND PERMEABILITY COEFFICIENTS OF CONCRETES CONTAINING SILICA FUME, FLY ASH, ZEOLITE AND LIMESTONE POWDER. Sharif Journal of Civil Engineering, 36(2.2), 13-25.
[58] Kaboudan., A.R., & Naderi, M., 2020. Experimental and theoretical study of the effect of concrete constituent materials on the permeability of hardened concrete using “Cylindrical chamber” method. . Ph.D. Student. , Imam Khomeini International University.
مهندسی عمران مدرس