شناسایی منطقه آسیب جداشدگی هسته بتنی از جداره فولادی ستون فولادی پر شده با بتن (CFST) با استفاده از روش تحلیلی آنالیز موجک

نوع مقاله : پژوهشی اصیل (کامل)

نویسندگان
محتشم خان احمدی 1
امید رضایی فر 2
مجید قلهکی 3
عادل یونسی 4
1 کارشناسی ارشد سازه، دانشکده مهندسی عمران، دانشگاه سمنان
2 دانشیار، دانشکده مهندسی عمران، دانشگاه سمنان
3 استاد، دانشکده مهندسی عمران، دانشگاه سمنان
4 دکتری سازه، دانشکده مهندسی عمران، دانشگاه سمنان
چکیده
ستون‌ فولادی پر شده با بتن (CFST) به دلیل بهره‌مندی از خواص مکانیکی همزمان دو ماده فولاد و بتن، قابلیت باربری بالا، تأمین ممان اینرسی معادل مقاطع بزرگ و افزایش فضای مفید داخل ساختمان‌ها و غیره، در صنعت ساختمان‌سازی به طور گسترده مورد استفاده است. با توجه به جایگاه و اهمیت این ستون‌ به خصوص در ساختمان‌های بلند و پل‌ها، شناسایی آسیب‌های جزئی به وجود آمده در آن‌، پیش از تبدیل به آسیب‌های بزرگ و غیر قابل جبران، ضروری و حائز اهمیت است. یکی از محتمل‌ترین آسیب‌ها در این نوع ستون، جدایی هسته بتنی از جداره فولادی است. در این نوشتار، المان ستون CFST در دو حالت آسیب و بدون آسیب در نرم افزار اجزاء محدود ABAQUS مدل‌سازی و تحلیل فرکانسی شد. اثر جداشدگی به صورت کاهش مدول الاستیسته بتن در محل‌های آسیب به عمق 3 میلی‌متر لحاظ گردید. بررسی‌ها نشان داد که اطلاعات شکل مودهای حالت‌های آسیب و بدون آسیب (زاویه بین بردار شکل مودها و مقادیر فرکانس‌) به دلیل تأثیر از آسیب دچار تغییر گردید. جهت شناسایی محل‌های آسیب جداشدگی، در الگوریتم شناسایی تبدیل موجک پیوسته، سیگنال ورودی به صورت مجموع یا تفاضل شکل مودهای حالت‌های آسیب و بدون آسیب بر مبنای زاویه بین بردار شکل مودها تعریف شد. نتایج نشان داد که سیگنال‌های خروجی حاصل از جزئیات آنالیز موجک سیگنال ورودی دارای اطلاعات سودمندی جهت شناسایی محل‌های جداشدگی هسته بتنی از جداره فولادی است و در مقیاس‌های بالا، محل‌های آسیب جداشدگی به راحتی قابل شناسایی است و در مقیاس‌های پایین، همگرایی بیشتری از ضرایب موجک در محل‌های آسیب مشاهده می‌گردد.

کلیدواژه‌ها

موضوعات

عنوان مقاله English

Detection of Debonding Damage Location of the Concrete Core from the Steel Tube of Concrete-Filled Steel Tube (CFST) Columns Using Wavelet Analysis Analytical Method

نویسندگان English

Mohtasham Khanahmadi 1
Omid Rezaifar 2
Majid Gholhaki 3
Adel Younesi 4
1 M.Sc. of Structural Eng., Faculty of Civil Engineering, Semnan University
2 Associate Professor, Faculty of Civil Engineering, Semnan University
3 Professor, Faculty of Civil Engineering, Semnan University
4 Ph.D. of Structural Eng., Faculty of Civil Engineering, Semnan University
چکیده English

Structures get local damages by passing time during the service period under environmental conditions and loads, although insignificant. It is essential and important to maintain the health, durability and proper performance of structures and their various parts and lack of proper recognition of the behavior of structures may cause spontaneity damages and consequently, high social and economic costs may occur. According to the proper performance of CFST columns, using this type of columns in high-rise buildings and bridge structures has expanded especially in seismic areas. Steel and concrete can cover each otherchr('39')s weaknesses by simultaneously using concrete and steel in CFST columns. The weakness of concrete against tensile and the weakness of steel against pressure has compensated by the combination of steel and concrete in this type of columns. Also these columns may be damaged during construction or after experiencing load periods (earthquake, wind, etc.), because getting structures damage is inevitable. One of the primary goals of Structural Health Monitoring (SHM) is damages detection of the structure in the early stages of formation. If the damage locations in the structure can be determined and its gradual course can be observed, the damaged members can be repaired or replaced before reaching the critical condition and occurring complete breakdown. Among the methods of damage detection, many researchers consider the methods based on signal processing. One of the methods of signal processing is the mathematical method of wavelet analysis. By using wavelet analysis, more information can be obtained from the intended signal based on its ability to localize the signal in both time and frequency domains. One of the most probable damages in CFST columns is the debonding of the concrete core from the steel tube. In this paper, the CFST column element was modeled and frequency analyzed in ABAQUS finite element software in two conditions including damage and no-damage. The effect of the debonding was considered by decreasing the modulus of elasticity of the concrete in the damage places with depth of 3 mm. The results of the analysis have shown that the information of the mode shapes of the damage and no-damage conditions (angle between the mode shape vectors and the frequency values) changes due to the effect of the damage. In order to identify the debonding damage locations, in the Continuous Wavelet Transform (CWT) detection algorithm, the input signal was defined as the sum or difference of the mode shape of the damage condition and the mode shape of the no-damage condition based on the angle between the damaged and no-damaged mode shape vectors. The results showed that the output signals obtaining from the details of input signal wavelet analysis have useful information to identify the debonding locations of the concrete core from the steel tube and at high scales, the locations of the debonding damage identify easily, and at low scales, more convergence of wavelet coefficients is observed in the locations of the damage. According to the results, the proposed method was introduced as an effective detection method of debonding damage in CFST columns.

کلیدواژه‌ها English

Concrete-Filled Steel Tube Column (CFST)
Debonding Damage
Frequency Analysis
Wavelet Analysis
Damage detection
[1] Reda-Taha M.M., Noureldin A., Lucero J.L., Baca T.J. 2006 Wavelet transform for structural health monitoring: A compendium of uses and features, Structural Health Monitoring, 5(3), 267-295.
[2] Andreaus U., Baragatti P., Casini P., Iacoviello D. 2017 Experimental damage evaluation of open and fatigue cracks of multi-cracked beams by using wavelet transform of static response via image analysis, Structural Control and Health Monitoring, 24(4).
[3] Zhou S., Tang B., Chen R. 2009 Comparison between non-stationary signals fast fourier transform and wavelet analysis, Intelligent Interaction and Affective Computing, International Asia Symposium, IEEE.
[4] Newland D.E. 1994 Wavelet analysis of vibration, Theory Journal of Vibration and Acoustics, 116(4), 409-416.
[5] Sone A., Yamamoto S., Nakaoka A., Masuda A. 1995 Health monitoring system of structures based on orthonormal wavelet transform, Seismic Engineering, ASME, 312, 161-167.
[6] Wang Q., Deng X. 1999 Damage detection with spatial wavelets, International Journal of Solids and Structures, 36(23), 3443-3468.
[7] Hou Z., Noori M., Amand R. 2000 Wavelet-based approach for structural damage detection, Journal of Engineering Mechanics, ASCE, 126, 677-683.
[8] Douka E., Loutridis S., Trochidis A. 2002 Crack identification in plates using wavelet analysis, Journal of Sound and Vibration, 270, 279-295.
[9] Ovanesova A.V., Suarez L.E. 2004 Applications of wavelet transforms to damage detection in frame structures, Engineering Structures, 26(1), 39-49.
[10] Loutridis S., Douka E., Trochidis A. 2004 Crack identification in double-cracked beams using wavelet analysis, Journal of Sound and Vibration, 277, 1025-1039.
[11] Chang C.C., Chen L.W. 2005 Detection of the location and size of cracks in the multiple cracked beam by spatial wavelet based approach, Mechanical Systems and Signal Processing, 19(1), 139-155.
[12] Khatam H., Golafshani A.A., Beheshti-Aval S.B. and Noori M. 2007 Harmonic class loading for damage identification in beams using wavelet analysis, Structural Health Monitoring, 6(1), 67-80.
[13] Gokdag H., Kopmaz O. 2009 A new damage detection approach for beam-type structures based on the combination of continuous and discrete wavelet transforms, Journal of Sound and Vibration, 324, 1158–1180.
[14] Katunin A. 2010 Identification of multiple cracks in composite beams using discrete wavelet transform, Scientific Problem of Machines Operation and Maintenance, 45(2), 41-52.
[15] Ghodrati-Amiri G., Bagheri A., Seyed Razzaghi S.A., Asadi A. 2010 Structural damage detection in plate using wavelet transform, Challenges, Opportunities and Solution in Structural Engineering and Construction.
[16] Zhong S. and Oyadiji S.O. 2011 Crack detection in simply supported beams using stationary wavelet transform of modal data, Structural Control and Health Monitoring, 18, 169-190.
[17] Ruckha M. 2011 Damage detection in beam using wavelet transform on higher vibration modes, Journal of Theoretical and Applied Mechanics, 49(2), 399–417.
[18] Bagheri A., Kourehli S. 2013 Damage detection of structures under earthquake excitation using discrete wavelet analysis, Asian Journal of Civil Engineering (BHRC), 14(2), 289-304.
[19] Xu W., Radzienski M., Ostachowicz W. and Cao M. 2013 Damage detection in plates using two-dimensional direction Gaussian wavelets and laser scanned operating deflection shapes, Structural Health Monitoring, 12(5-6), 457-468.
[20] Lee S.G., Yun G.J. and Shang S. 2014 Reference-free damage detection for truss bridge structures by continuous relative wavelet entropy method, Structural Health Monitoring, 1-14.
[21] Li J., Hao H. 2014 Substructure damage identification based on wavelet-domain response reconstruction, Structural Health Monitoring, 1-17.
[22] Katunin A. 2015 Stone impact damage identification in composite plates using modal data and quincunx wavelet analysis, Archives of Civil and Mechanical Engineering, 15(1), 251-261.
[23] Patel S.S., Chourasia A., Panigrahi S., Parashar J., Parvez N., and Kumar M. 2016 Damage identification of RC structures using wavelet transformation, Procedia Engineering, 144, 336-342.
[24] Rahami H., Amini-Tehrani H., Akhavat M., and Ghodrati-Amiri G. 2016 Damage detection in offshore fixed platforms using concepts of energy entropy in wavelet packet transform, Amirkabir Journal of Civil and Environmental Engineering, 48(3), 241-248 (in Persian).
[25] Amoozadeh A., Fadavi-Amiri M., Zare Hosseinzadeh, A. and Ghodrati-Amiri G. 2016 Processing of structural responses via wavelet transform for detecting damage under earthquake excitation, Modares Civil Engineering Journal, 16(20), 103-117 (in Persian).
[26] Naderpour H., Fakharian P. 2016 A synthesis of peak picking method and wavelet packet transform for structural modal identification, KSCE Journal of Civil Engineering, 20(7), 2859-2867.
[27] Yang C., Oyadiji S.O. 2017 Delamination detection in composite laminate plates using 2D wavelet analysis of modal frequency surface, Journal of Computers and Structures, 179, 109-126.
[28] Zhao Y., Noori M., Altabey W.A. and Beheshti-Aval, S.B. 2017 Mode shape-based damage identification for a reinforced concrete beam using wavelet coefficient differences and multiresolution analysis, Structural Control and Health Monitoring.
[29] Rezaifar O., Younesi A., Gholhaki M., and Esfandiari A. 2018 Debbonding damage detection in concrete filled tube columns by experimental modal data, Journal of Structural and Construction Engineering (JSCE), 6(4), 93-106. (In Persian).
[30] Younesi A., Rezaifar O., Gholhaki M., and Esfandiari A., Structural health monitoring of a concrete-filled tube column, Magazine of Civil Engineering, 85, 136-145.
[31] Payesteh M., Aghajan Nashtaee M., Taheri Nasab M., Beheshti-Aval S.B. 2019 Detection of damage in simply-supported plates by discrete wavelet transform of reconstructed modal data, Amirkabir Journal of Civil Engineering, 51(3), 503-522. (In Persian)
[32] Hoseini-Vaez S.R., Arefzade T. 2019 Comparison of static and modal analysis in damage detection of concrete gravity dams via wavelet transform, Sharif Journal of Civil Engineering, 35.2 (1.1), 33-41. (In Persian)
[33] Wang S., Li J., Luo H., and Zhu H. 2019 Damage identification in underground tunnel structures with wavelet based residual force vector, Journal of Engineering Structures, 178, 506-520.
[34] Khanahmadi M., Rezayfar O., and Gholhaki M. 2019 Damage detection in steel plates based on comparing analytical results of the discrete 2-D wavelet transform of primary and secondary modes shape, Journal of Structural and Construction Engineering (JSCE). (In Persian).
[35] Khanahmadi M., Rezayfar O., and Gholhaki M. 2019 Damage detection of prefabricated walls (panel 3D plates) based on wavelet transform detection algorithm, Journal of Structural and Construction Engineering (JSCE). (In Persian).
[36] Khanahmadi M., Rezayfar O., and Gholhaki M. 2020 Comparative study on beams damage detection based on continuous and discrete wavelet transforms of static and dynamic responses, Journal of Structural and Construction Engineering (JSCE). (In Persian).
[37] Khanahmadi M., Gholhaki M., and Rezayfar O. 2021 Damage identification of column under the axial load based on wavelet transform and modal data, Journal of Modeling in Engineering (JME). (In Persian).
[38] Xu B., Li B., and Song G. 2012 Active debonding detection for large rectangular CFSTs based on wavelet packet energy spectrum with piezoceramices, Journal of Structural Engineering, 139(9), 1435-1443.
[39] Xu B., Zhang T., Song G., and Gu H. 2013 Active interface debonding detection of a concrete-filled steel tube with piezoelectric technology using wavelet packet analysis, Mechanical Systems and Signal Processing, 36(1), 7-17.
[40] Xu B., Chen H., Mo Y.L., and Zhou T. 2018 Dominance of debonding defect of CFST on PZT sensor response considering the meso-scale structure of concrete with multi-scale simulation, Mechanical Systems and Signal Processing, 107, 515-528.
[41] Xu B., Chen H., and Xia S. 2017 Numerical study on the mechanism of active interfacial debonding detection for rectangular CFSTs based on wavelet packet analysis with piezoceramics, Mechanical Systems and Signal Processing, 86, 108–121.
[42] Xu B., Chen H., and Xia S. 2017 Wave propagation simulation and its wavelet package analysis for debonding detection of circular CFST members, Smart Structure Systems, 19(2), 181–194.
[43] Xu B., Chen H., Mo Y.L., and Chen X. 2017 Multi-physical field guided wave simulation for circular concrete-filled steel tubes coupled with piezoelectric patches considering debonding defects, International Journal of Solids Structures, 122(123), 25–32.
[44] Benedetto J.J., Frazier M.W. 1994 Wavelets: Mathematics and application, CRC Press, Boca Raton.
[45] Rao K.R., Kim D.E., and Hwang J.J. 2005 Fast fourier transform: Algorithm and applications, Springer, Berlin Heidelberg.
[46] Mertins A. 1992 Signal Analysis: Wavelets, Filter Banks, Time-Frequency Transforms and Applications, Wiley.
[47] MATLAB Reference Guide, the Math Works, Ince, 2010b.
[48] Zhongm S., Oyadiji S.O. 2011 Detection of cracks in simply-supported beams by continuous wavelet transform of reconstructed modal data, Computers and Structures, 89(1-2), 127-148.
[49] Hansang K., Hani M. 2004 Damage detection of structures by wavelet analysis, Engineering Structures, 26(3), 347-362.
مهندسی عمران مدرس
دوره 22، شماره 1
فروردین و اردیبهشت 1401
صفحه 129-142