ارزیابی عملکرد لرزه ای سیستم ترکیبی سری میراگر جرمی و ستون مایع و ارائه روشی برای افزایش کارایی آن

نویسندگان
1 دانشکده عمران دانشگاه تهران
2 دانشگاه آزاد اسلامی واحد تهران مرکزی
چکیده
در سال های اخیر به توسعه وسائل مؤثر در استهلاک انرژی لرزه ای در سازه ها اهمیت بیشتری داده شده است که پاسخ سازه اصلی را در ناحیه الاستیک نگه دارند . به این منظور، میراگرها برای کم کردن اثر نیروی زلزله به سازه ها استفاده م ی شوند . همچنین تکنولوژی هایی برای استهلاک انرژی لرزه ای با قرار دادن جرم کمکی توسعه پیدا کرده است . 0 و /01-0/03 ،0/005-0/ در این مقاله، سیستم ترکیبی سری میراگر جرمی و ستون مایع تنظیم شده با نسبت های جرمی 035 0/02-0/02 در نظر گرفته شده است. تحلیل تاریخچه زمانی بر روی سازه های 20 طبقه تحت زلزله های نرتریج، طبس و لوما پرایتا 0.4 با استفاده از نرم افزار شبیه سازی مطلب انجام شده است. عملکرد سیستم های ترکیبی سری با سیستم تک میراگر g مقیاس شده به ستون مایع مقایسه شده و همچنین کارایی سیستم های ترکیبی سری با افزایش ضریب افت هد بررسی شده است . نتایج حاکی از آن است که عملکرد سیستم ترکیبی سری وابسته به مشخصات زلزله های مختلف، فرق می کند و با افزایش نسبت جرمی جرم دوم و نیز با انتخاب نسبت فرکانسی بهینه بر اساس پاسخ ها، کارایی میراگر ترکیبی سری افزایش می یابد .

کلیدواژه‌ها


عنوان مقاله English

Seismic performance assessment for hybrid system of tuned mass & liquid column damper in series and a method to increase efficiency

نویسندگان English

S.M. Zahrai 1
R. Biglarian 2
1 University of Tehran
2 Tehran Central branch of Azad University
چکیده English

In recent years, development of effective devices for seismic energy dissipation in structures has become more important to keep response of structure in elastic range. Dampers are used in structures to reduce response and effect of seismic forces. Also, using secondary mass technology can help seismic energy dissipation. Among these systems one can mention tuned mass damper and tuned liquid column damper, working base on secondary inertia in structures. In this paper, hybrid system of tuned mass & liquid column dampers in series was considered with mass ratios 0.035-0.005, 0.03-0.01 and 0.02-0.02. Time history analysis using the Northridge, Tabas and Loma Prieta earthquakes for 20 story structures were modeled in Simulink Matlab software considering shearing structure and damper modeling in every blocks separately. Effect of damper to structure is determined as forces applying on corresponding story. Performance indices using software outputs such as root mean square and Maximum of displacement and acceleration of stories were calculated. Performance of single and hybrid systems has been compared due to different earthquakes. Also effect of hybrid systems in series was studied by increasing head loss coefficient. Results show that performance of hybrid systems is dependent on earthquake characteristics that improves with increasing secondary mass ratio. For example under the Northridge earthquake, hybrid system in series tuned mass & liquid column damper with mass ratios 0.035-0.005, 0.03-0.01 and 0.02-0.02 decrease root mean square of displacement of stories 45, 27 and 2 percent respectively and also by selecting optimum frequency ratio based on responses of structure. For example maximum acceleration of hybrid system of tuned mass & liquid column damper in series with mass ratio 0.035-0.005 is optimum frequency ratio in 2.9 and also by selecting this frequency ratio decrease maximum acceleration of up and down stories in 20 story structure. By comparing effects of hybrid system Tuned Mass & Liquid Column Damper in series with different mass ratios on two structures with periods of 1.5 and 2.44 second are considering where by increasing stiffness of structure, performance of hybrid system was improved leading to decrease of acceleration responses and reduction of displacement responses. For example, J1 in 20 story structure with period 1.5 second is 0.71 whereas in other structure is 0.79 that show hybrid system has better performance in structure with period 1.5 second. Hybrid system in series damper with mass ratio 0.035-0.005 have best performance to reduce displacement stories of 20 story structure with period 1.5 second as J3=0.56 means decrease 44%. Also in other structure, hybrid system with mass ratio 0.035-0.005 has best performance to reduce displacement at top floor with J4=0.56. Also performance of hybrid system to reduce maximum displacement of stories was improved by increasing head loss coefficient in tuned liquid column damper

کلیدواژه‌ها English

Hybrid system in series Tuned Mass & Liquid Column Damper
passive control
Optimum Frequency Ratio
 
1]
اخوت هانیه، امیرخانی آرین، زرکش افسانه، پورجعفر ]
محمدرضا،
" معرفی روش های نوین در کنترل
ارتعاشات ساختمان های بلند
"، فصلنامه معماری و
.141- 1387
، صفحه 136 ، ساختمان، شماره 16
[2] Sadek, F., Mohraz, B., Taylor, A. W., Chung, R. M., “
A Method of Estimating The Parameters of Tuned
Mass Dampers For Seismic Applications”, Earthquake
Engineering And Structural Dynamics, Vol. 26, 1997,
pp.617-635.
[3] Sakai, F., Takaeda, S., Lew H. S., “Tuned Liquid
Column Damper-New Type Device For Suppression of
Building Vibration”, Conference on High Rise Build,
Nanjing, China, 1989, pp.926-931.
[4] Haroun, M.A., Pires, J.A., Won, A.Y.J., “Effectiveness
of Hybrid Liquid Column Dampers for Suppressing
Structural Vibrations”, Proceedings of the 13th
International Modal Analysis Conference, Vol. 2460,
1995, p.525-531.
[5] Wu, J.C., Chang, C.H., Lin, Y.Y., “Optimal Design
For Non-Uniform Tuned Liquid Column Dampers in
Horizontal Motion”, Journal of Sound Vibration, 2009,
pp.104-122.
[6] Chang, C.H., Wu, J.C., Cheng, C.M., Lin, Y.Y.,
“Computational fluid dynamics simulation for
horizontal movement tuned liquid column damper”,
The 5
th
International Symposium on Computational
Wind Engineering (CWE2010), 2010, Chapel Hill,
 
North Carolina, USA.
 
[7] Banerji, P., and Samanta, A., “Earthquake Vibration
 
Control of Structure Using Hybrid Mass Liquid
 
Damper”, Engineering Structure, 2011, pp.1291-1301.
 
[8] Sadek, F., Mohraz, B., LEW H. S., “ Single-And
 
Multiple-Tuned Liquid Column Dampers For Seismic
 
Applications”, Earthquake Engineering And Structural
 
Dynamics, 1998, pp.439-463.
 
[9] Yang, J., Agrawal, A., Samali, B., Wu, J., “ A
 
Benchmark Problem for Response Control of Wind-
 
Excited Tall Buildings”, Proceedings of Second World
 
Conference on Structural Control, Vol. 2, 1998,
 
pp.229-231.
 
[10] MATLAB, User Guide, Curve Fitting Toolbox,
 
MathWorks Inc., Version 7.6.0, 2011.
 
[11] PEER Strong ground motion database. http://peer.
 
berkeley. edu/ smcat [Accessed on April2012