Modares Civil Engineering journal
مهندسی عمران مدرس
MCEJ
Engineering & Technology
http://mcej.modares.ac.ir
1
admin
2476-6763
10.22034
fa
jalali
1389
3
1
gregorian
2010
6
1
10
1
online
1
fulltext
fa
تعیین مقاومت مصالح در ساختمان ها
« پیچش » با استفاده از روش درجای
‹‹Research Note››
Determination of Strengths of Construction
Materials Applying the in Situ Twist off Method
چکیده - از آنجا که برای مطالعه رفتار و دوام و همچنین برای جایگزینی مناسب مواد و مصالح در تعمیر و
مرمت، آگاهی از مقاومت واقعی مصالح بکار گرفته شده در بناها از اهمیت ویژه ای برخوردار است و با توجه به
اینکه شرایط رایج در استفاده از رو شهای آزمایشگاهی با شرایط محیطی و بهر هبرداری این بناها کاملاً متفاوت
می باشند، در سال های اخیر کوشش های زیادی برای ابداع روش های درجا بعمل آمده است ولی در اغلب این
روش ها، پارامترهایی به صورت غیرمستقیم اندازه گیری و سپس با استفاده از روابطی، مقاومت مصالح موردنظر
که در این مقاله به آن پرداخته شده است، روشی است که می توان با « پیچش » تخمین زده می شود. روش
به کارگیری آن مقاومت واقعی و درجای مصالح بکارگرفته شده در ساختمانها، از جمله بتن, ملات، آجر و سنگهای
بکار می رود چون قسمت بسیار کوچکی « بطور مستقیم » مصرفی را بطور مستقیم بدست آورد. به این دلیل عبارت
از مصالح مورد نظر شکسته شده و مقاومت آن به دست می آید. از بررسی های آزمایشگاهی و مطالعات درجای
بعنوان روشی کم هزینه و مطمئن (دقت بالا) برای اندازه گیری مقاومت درجای مصالح « پیچش » بعمل آمده، روش
در ساختمان ها پیشنهاد می گردد. همچنین، این روش می تواند با دقت قابل قبولی برای بررسی رفتار و دوام مصالح
بکار رفته در بناها ونیز برای انتخاب بهینه مواد و مصالح جایگزین برای تعمیر و مرمت این گونه سازه ها بکار گرفته
شود. از جمله امتیازات این روش می توان به سادگی روش، ارزانی و سادگی ابزار بکار گرفته شده، کم هزینه بودن
آن، آسیب بسیار ناچیز بجا مانده و عدم نیاز به متخصص و یا نیروی ماهر اشاره نمود.
Abstract
Since for some reasons such as studying the behaviour of old construction materials and proper replacement of
the deteriorated sections, adequate knowledge about the true in situ strength of the construction materials has
become a necessity, many attempts have been made to invent and develop new in situ methods in recent years.
Most of these methods measure the in situ strengths of materials indirectly by measuring properties other than
the strength and relating them to strength by some defined relationships. This paper introduces an innovative
partially destructive method, called “Twist-off”, for the assessment of in situ concrete, mortar, and masonry
strengths of materials used in buildings and structures. In addition to the laboratory results, the results of the
successful application of this method on site are also presented in this paper. Based on the results obtained, the
use of this new in situ method with its advantages of simplicity (no need for experts), low expense, cheap and
simple apparatus, little damage to the surface area, and high accuracy is strongly recommended for the
determination of in situ strengths of construction materials (concrete, mortar, and masonry) used in different
buildings and structures.
کلید واژگان: مقاومت در جا,مقاومت مصالح,روش پیچش,تعیین مقاومت
In Situ Strength,Material Strength,Twist off Method,Determination of Strength
0
0
http://mcej.modares.ac.ir/browse.php?a_code=A-10-1000-5861&slc_lang=fa&sid=16
M.
Naderi
محمود
نادری
100319475328460040631
100319475328460040631
Yes
S.
Maadani
سعید
معدنی
100319475328460041203
100319475328460041203
No