Modares Civil Engineering journal
مهندسی عمران مدرس
MCEJ
Engineering & Technology
http://mcej.modares.ac.ir
1
admin
2476-6763
10.22034
fa
jalali
1390
6
1
gregorian
2011
9
1
11
2
online
1
fulltext
fa
ارزیابی عملکرد سیستم ترکیبی قاب-پانل
در رفتار لرزه ای
Investigation of Seismic Behavior of Frame-Panel Systems
چکیده- با توجه به اهمیت سبک سازی، بهینه سازی و صرفه جویی در مصرف سوخت در ساختمان، استفاده از پانل های سه بعدی
به عنوان دیوارهای داخلی و خارجی، بار بر و جد اکننده و همچنین به عنوان سقف ساختمان ها، در حال افزایش است. در حال حاضر
استفاده از پانل ها در کنار قاب سازه ای، بدون در نظر گرفتن اندرکنش قاب و پانل نیز به شکل قابل توجهی افزایش پیدا کرده است.
با توجه به تفاوت رفتاری قاب و پانل (در مودهای برش و خمش) پیش بینی می شود که ترکیب این دو سیستم در ارتفاع، موجب
تغییر رفتار لرزه ای سیستم های ترکیبی، نسبت به هر کدام از سیستم های تنها شود. در این مقاله، در ابتدا رفتار لرزه ای قاب های
مورد بررسی قرار گرفته، سپس هریک ANSYS 5 و 10 طبقه تحت رکوردهای السنترو، طبس و ناغان در نرم افزار ، فولادی و پانلی 3
از دهانه های قاب، توسط پانل پر و تأثیر پرشدگی دهانه های مختلف در رفتار لرزه ای سیستم های ترکیبی ارزیابی شده است . در
پایان و پس از بررسی های انجام شده مشخص شد که استفاده از پانل ها علاوه بر تأثیر مثبت در متعادل کردن و کاهش تغییر مکان های
نسبی در ارتفاع، سبب بهبود رفتار لرزه ای سیستم شده و قابلیت استهلاک انرژی سیستم را افزایش می دهد. پوشش 33 درصد از
دهانه قاب به وسیله ی پانل، حداقل 100 % سطح زیر منحنی پوش را افزایش و حداقل 35 % تغییر مکان بام سازه را، تحت رکوردهای
مختلف زلزله، کاهش داده است.
Abstract:
Implementation of 3D panels in buildings is increasing due to the importance of lightening,
optimizing and reduction of fuel consumption. These panels are used as interior, outer, load
bearing and partitioning walls beside the structural frame without considering the frame-panel
interaction. Steel frames act in shear mode and panel frames act in flexure; hence, combining
the two systems will change the structural behavior of each system. So, investigation of the
seismic behavior of combined systems using nonlinear dynamic methods seems to be
mandatory.
In this article, frames with 3, 5 and 10 stories (filled in different bays by panel) were modeled
in ANSYS. These frames were then analyzed under Elcentro, Tabas and Naghan seismic
records. The results illustrated that using panel not only results in more acceptable drifts, but
also it lets the system to have a better seismic behavior and more energy dissipation. For
example, the displacements of the structures in the highest level decrease more than 35% by
using one bay panel for filling steel frames. This amount of filling also leads to more than
100% increase in the area under the base shear-displacement diagram of a steel frame.
ارزیابی عملکرد,پانل 3Dتحلیل استاتیکی و دینامیکی غیرخطی,ترکیب قاب و پانل,رفتار لرزه ای
Performance assessment3D panel,nonlinear static and dynamic analysis,Panel and
frame combination,Seismic behavior
0
0
http://mcej.modares.ac.ir/browse.php?a_code=A-10-1000-1815&slc_lang=fa&sid=16
M.
Gerami
محسن
گرامی
100319475328460042033
100319475328460042033
Yes
S.A.R
Kaboli
سید علی رضا
کابلی
100319475328460042034
100319475328460042034
No