Modares Civil Engineering journal
مهندسی عمران مدرس
MCEJ
Engineering & Technology
http://mcej.modares.ac.ir
1
admin
2476-6763
10.22034
fa
jalali
1394
6
1
gregorian
2015
9
1
15
5
online
1
fulltext
fa
ارزیابی عددی اثر کامپوزیتهای پلیمری (FRPS) در تقویت دال بتنآرمه در معرض انفجار
Numerical Evaluation of the Retrofit Effectiveness for Fiber Reinforced Polymers (FRPS) Retrofitted Concrete Slab Subjected to Blast Loading
یکی از راههای تقویت المانهای سازهای تحت انفجار، استفاده از مصالح با شکلپذیری و مقاومت بالا نظیر کامپوزیتهای پلیمری مسلح شده (FRPS) است. بررسی تأثیر تقویت المانها، با انجام تستهای آزمایشگاهی و تحلیل پاسخ نمونه تحت انفجار انجام میشود. در این مطالعه به تحلیل دینامیکی غیر خطی نمونه دالهای مسلح شده با کامپوزیتهای FRP، تحت بارهای انفجاری پرداخته شدهاست. جهت مدل سازی نمونهها و بارگذاری از نرم افزار LS-DYNA استفاده شده و نتایج تحلیل با نتایج آزمایشگاهی موجود مقایسه شده است که سازگاری پاسخ عددی نرم افزار و تستهای آزمایشگاهی حاصل گشتهاست. به طور کلی نمونههای تقویت شده با کامپوزیت نسبت به نمونههای فاقد تقویت پاسخ بهتری در مقابل تستهای انفجاری داشتهاند. همچنین دراینجا مطالعات پارامتری جهت بررسی حد تأثیر هر کدام از پارامترهای ضخامت ورقهی کامپوزیت، مقاومت کامپوزیت، مقاومت فشاری بتن و درصد میلگردهای فولادی به طور مستقل صورت گرفته است. افزایش مقاومت فشاری بتن نسبت به افزایش سایر پارامترها تأثیر بیشتری در بهبود پاسخ نمونه تحت انفجار داشته و به عبارتی مقرون به صرفهتر است. جهت بررسی مقاومت کامپوزیت در پاسخ نمونه تقویت شده، با ثابت نگه داشتن همه مشخصات نمونه و تنها با تغییر نوع کامپوزیت، از دو نوع کامپوزیت پلیمری کربن (CFRP) و کامپوزیت پلیمری شیشه (GFRP) استفاده شده است. نتایج نشان میدهد که با توجه به این که مقاومت طولی کامپوزیتهای الیاف کربن نسبت به الیاف شیشه بالاتر است، در نتیجه بهبود در عملکرد نمونههای مسلح شده به کامپوزیت CFRP نسبت به GFRP بیشتر حاصل شده است.
For retrofitting structures against blast loads, sufficient ductility and strength should be provided by Using high-performance materials such as fiber reinforced polymer (FRP) composites. The effectiveness of retrofit materials needs to be precisely evaluated for the retrofitting design based on the dynamic material responses under blast loads. The structural behavior of reinforced concrete (RC) slab retrofitted with fiber reinforced polymer (FRP) under blast pressure is simulated using nonlinear transient analysis of Ls-Dyna software. And the analysis results are verified with the previous experimental results. It was determined that overall the FRP retrofitted panels performed better than the companion control panels. Parametric studies are performed to examine the influence of FRP thickness, FRP strength, Compressive strength of concrete, ratio of steel bars on the response of retrofitted panel. Improvement on slab blast load resistance capacity is achieved by increasing all of parameters. But effect of increasing Compressive strength of concrete is more than another, In other words, increasing Compressive strength of concrete is economical. The relative effectiveness of CFRP and GFRP in strengthening deficient slabs can be evaluated by comparing the behavior of specimens. The two slabs in each set of specimens are similar in every aspect except that one slab was retrofitted by CFRP whereas the other one was confined by GFRP. The layers of the GFRP were as those of the CFRP. Comparisons of the ductility parameters show that both slabs in each set behaved in a similar manner and had comparable ductility parameters, the ultimate tensile strength of the CFRP fabric was higher than that of the GFRP fabric. The effectiveness of CFRP measured was larger than that of GFRP. From these test results, it appears that the effectiveness of FRP in enhancing slab ductility closely relates to its ultimate tensile strength..For retrofitting structures against blast loads, sufficient ductility and strength should be provided by Using high-performance materials such as fiber reinforced polymer (FRP) composites. The effectiveness of retrofit materials needs to be precisely evaluated for the retrofitting design based on the dynamic material responses under blast loads.The structural behavior of reinforced concrete (RC) slab retrofitted with fiber reinforced polymer (FRP) under blast pressure is simulated using nonlinear transient analysis of Ls-Dyna software. And the analysis results are verified with the previous experimental results. It was determined that overall the FRP retrofitted panels performed better than the companion control panels. Parametric studies are performed to examine the influence of FRP thickness, FRP strength, Compressive strength of concrete, ratio of steel bars on the response of retrofitted panel. Improvement on slab blast load resistance capacity is achieved by increasing all of parameters. But effect of increasing Compressive strength of concrete is more than another, In other words, increasing Compressive strength of concrete is economical. The relative effectiveness of CFRP and GFRP in strengthening deficient slabs can be evaluated by comparing the behavior of specimens.
دال بتن مسلح,انفجار,کامپوزیتهای FRPS,نرمافزارLS-DYNA
Reinforced Concrete slabs,fiber reinforced polymers,nonlinear transient analysis,Explosion,LS-DYNA Software
19
30
http://mcej.modares.ac.ir/browse.php?a_code=A-16-15063-2&slc_lang=fa&sid=16
marjan
gordan
مرجان
گردان
100319475328460058289
100319475328460058289
No
kordestan university
دانشگاه کردستان
mahammad
Nia omran
محمداسماعیل
نیاعمران
100319475328460058288
100319475328460058288
Yes
kordestan university
دانشگاه کردستان