Volume 16, Issue 1 (2016)                   MCEJ 2016, 16(1): 146-156 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

minaei gigloo A, ghodsian M, mehraein M. Experimental Investigation of Hydraulic Jump in stilling basin with Stepped Sill. MCEJ 2016; 16 (1) :146-156
URL: http://mcej.modares.ac.ir/article-16-8009-en.html
1- student of tarbiat modares university
2-
Abstract:   (4934 Views)
Hydraulic jump is a rapid and sudden transition from a high-velocity supercritical flow to a subcritical flow in an open channel flow. Stilling basins are used to control the hydraulic jump at the downstream of chutes, sluice gates,… End Sills, baffle blocks and negative steps are often used to control hydraulic jumps in stilling basins. The present study focuses on the formation of hydraulic jump in the new type of stilling basins with stepped sills. Extensive experiments were conducted in a rectangular flume 0.6 m wide, 12.0 m long and 1.0 m deep, with various discharges from 30 to 120 l/s. Water was pumped from an underground sump into a head tank and the discharge was measured with a ultrasonic flowmeter. At the downstream end of the head tank there was a sluice gate into the flume. The edge of the sluice gate has a streamlined lip in the shape of a half-cylinder of diameter 20 cm to minimize flow contraction and provide a uniform supercritical flow. A point gauge with an accuracy of 0.1 mm was used to measure water depths. In order to visualize the flow field, the dye-injection method and a high speed camera were employed. A tailgate located at the downstream end of the flume was used to control the tailwater depth. The effects of stepped end sills on hydraulic jumps were investigated experimentally. Firstly, dimentionless parameters affecting the hydraulic jump on stepped sill introduced using Buckingham π theorem. The effect of important parameters such as approach Froude number (Fr1), relative tailwater depth (〖y_t/y〗_2^*) and the end sill geometry (shape and relative height of sill (s/y1)) on hydraulic jump were investigated. The hydraulic jumps over stepped end sills were classified into A-jump, B-jump, minimum B-jump, C-jump and minimum C-jump. By changing the type of flow from A-jump to minimum C-jump, the jump is going to sweepout from basin. A-jump is entirely formed in the basin and at the upstream of sill. In the case of minimum C-jump, most of the surface roller of jump formed at the downstream of sill. The flow types are presented in the form of 6 different diagrams as functions of the relative step height s/y1. By increasing the tailwater depth, sill height, the probability of occurance of hydraulic jump in the stilling basin increased. It was found that the sill with 2 steps have better performance in stabilizing the jump in the stilling basin as compare to sill with 3 steps. By increasing the approach Froude number, the jump began to sweep away from basin. By knowing the initial condition like upstream velocity and upstream froude number, tailwater depth, sill height and its number of steps the toe distance from sill can be found out with desirable accuracy.
Full-Text [PDF 1224 kb]   (9385 Downloads)    
Article Type: Original Manuscript | Subject: -------|-------
Received: 2014/02/18 | Accepted: 2016/01/21 | Published: 2016/03/20

Add your comments about this article : Your username or Email:
CAPTCHA

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.