Volume 17, Issue 3 (2017)
MCEJ 2017, 17(3): 183-184 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
motalebizadeh M, Shafieefar M, ghodsian M. Sedimentation Position Prediction in the Swash Zone of Sandy Beaches using Response Surface Method. MCEJ 2017; 17 (3) :183-184
URL: http://mcej.modares.ac.ir/article-16-1906-en.html
URL: http://mcej.modares.ac.ir/article-16-1906-en.html
1- PhD student of Hydraulic, Faculty of Civil and Environmental Eng., Tarbiat Modares University
2- Prof., Coastal Engineering. Faculty of Civil and Environmental Eng., Tarbiat Modares University
3- Prof., Hydraulic Structures. Faculty of Civil and Environmental Eng., Tarbiat Modares University
2- Prof., Coastal Engineering. Faculty of Civil and Environmental Eng., Tarbiat Modares University
3- Prof., Hydraulic Structures. Faculty of Civil and Environmental Eng., Tarbiat Modares University
Abstract: (4986 Views)
Reflective beaches requires a combination of lower waves, longer periods and particularly coarser sands. They are typically steep in beach profile with a narrow shoaling and surf zone, composed of coarse sediment. Coarser sediment allows percolation during the swash part of the wave cycle, thus reducing the strength of backwash and allowing material be deposited in the swash zone
The Swash zone, as extreme area of inner surf zone, influences coastal area and coastal structures. It defined as the part of the beach between the minimum wave run-down and maximum wave run-up. It constitutes a beach area where waves dissipate or reflect their remaining energy after traveling towards the shore. The role of Swash zone is influenced by incoming waves from surf zone, the geometry of beach face and the interaction between beach groundwater and surf zone.
The review of Laboratory researches indicated that wave height and period, beach slope, grain size distribution of beach material, still water level (SWL), beach groundwater level, the hydraulic conductivity of beach influence on the evolution of sand beaches. In a few laboratory researches, experiments is designed with One Factor At a Time method (OFAT) and the qualitative effect of parameters of regular wave height and period, SWL and beach groundwater level, and beach slope are investigated on nearshore evolution.
In this research, experiments are designed using Central Composite Design (CCD) of Response Surface Method (RSM). CCD is a type of response surface design that present very good predictions in the middle of the design space. Important properties and features of CCD are orthogonality, rotatability and uniformity. The quantitative effects and interactions of irregular wave height and period, beach groundwater level and SWL, and beach slope on beach profile evolution is examined in a sandy beach by 50 experiments designed with CCD. The experiments are carried out in laboratory flume in Faculty of Civil and Environmental Engineering, Tarbiat Modares University with high accuracy. The experimental setup is designed to simulate varying beach groundwater level and SWL and course sand (d50=0.8mm) is selected for beach material. Analysis of hydrodynamic data of the experiments indicated that the type of breaking waves is plunging wave and the hydrodynamic status of the swash zone is intermediate condition. The starting position of swash sedimentation (SWS) is extracted from mean of the beach profiles evolution.
By analyzing of experiments' SWS using CCD, a cubic model is suggested with %95 confidence level and predicted R-squared of 0.86. The results of model revealed that groundwater level has no significant effect on SWS. Wave height is the most influential factor affecting SWS and increasing wave height result to this position moves to upper beach rapidly. In addition, increasing beach slope causes the movement of SWS toward the beach. Increasing sea level lead to the displacement of SWS toward the sea.
This model indicated that the effect of wave height on SWS depends on wave period strongly and there is significant interaction between them. In addition, there is slightly interaction between the SWL and wave height and these variables influence on the role of each other in SWS.
The Swash zone, as extreme area of inner surf zone, influences coastal area and coastal structures. It defined as the part of the beach between the minimum wave run-down and maximum wave run-up. It constitutes a beach area where waves dissipate or reflect their remaining energy after traveling towards the shore. The role of Swash zone is influenced by incoming waves from surf zone, the geometry of beach face and the interaction between beach groundwater and surf zone.
The review of Laboratory researches indicated that wave height and period, beach slope, grain size distribution of beach material, still water level (SWL), beach groundwater level, the hydraulic conductivity of beach influence on the evolution of sand beaches. In a few laboratory researches, experiments is designed with One Factor At a Time method (OFAT) and the qualitative effect of parameters of regular wave height and period, SWL and beach groundwater level, and beach slope are investigated on nearshore evolution.
In this research, experiments are designed using Central Composite Design (CCD) of Response Surface Method (RSM). CCD is a type of response surface design that present very good predictions in the middle of the design space. Important properties and features of CCD are orthogonality, rotatability and uniformity. The quantitative effects and interactions of irregular wave height and period, beach groundwater level and SWL, and beach slope on beach profile evolution is examined in a sandy beach by 50 experiments designed with CCD. The experiments are carried out in laboratory flume in Faculty of Civil and Environmental Engineering, Tarbiat Modares University with high accuracy. The experimental setup is designed to simulate varying beach groundwater level and SWL and course sand (d50=0.8mm) is selected for beach material. Analysis of hydrodynamic data of the experiments indicated that the type of breaking waves is plunging wave and the hydrodynamic status of the swash zone is intermediate condition. The starting position of swash sedimentation (SWS) is extracted from mean of the beach profiles evolution.
By analyzing of experiments' SWS using CCD, a cubic model is suggested with %95 confidence level and predicted R-squared of 0.86. The results of model revealed that groundwater level has no significant effect on SWS. Wave height is the most influential factor affecting SWS and increasing wave height result to this position moves to upper beach rapidly. In addition, increasing beach slope causes the movement of SWS toward the beach. Increasing sea level lead to the displacement of SWS toward the sea.
This model indicated that the effect of wave height on SWS depends on wave period strongly and there is significant interaction between them. In addition, there is slightly interaction between the SWL and wave height and these variables influence on the role of each other in SWS.
Keywords: sandy beaches, swash zone, Response surface method, laboratory model, starting position of swash sedimentation
Article Type: Original Manuscript |
Subject:
-------
Received: 2016/03/5 | Accepted: 2016/10/10 | Published: 2017/08/23
Received: 2016/03/5 | Accepted: 2016/10/10 | Published: 2017/08/23
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |