Volume 18, Issue 1 (2018)                   MCEJ 2018, 18(1): 157-170 | Back to browse issues page

XML Persian Abstract Print


Abstract:   (4579 Views)
Rainfall Runoff modeling especially in ungauged watersheds is almost dependent on hydro-geomorphologic data. In this regard, the effects of data and DEM resolution on deriving watershed’s geomorphologic data such as subbasins area, channels and subbasins’ slope should be well realized in modeling. In this research, HEC-HMS as the rainfall runoff model and two subbasins with different areas, geomorphologic properties and climate were selected for studying. By reducing the cell size of the DEM derived from a topo map, simulated peaks increased. For DEM cell sizes less than 100 m, the differences in simulated peak were limited to 2 to 5%. Using SRTM DEMs against the topo DEM at the scale of 1:25000, representing the effects of data resolution in rainfall runoff modeling, led to obtaining higher flood peaks at the two watersheds. Such an outcome was obtained for time to peak, hydrograph base time, and the slope of hydrograph rising limb. Change of SRTM DEM resolution affected the model output more than the case of using topo DEM. Decreasing DEMs resolution by decreasing information content of the topo DEM reduced differences in the model output when using two different sources of DEM. Furthermore, it is concluded that the extent of scale effect in modeling could not be inferred by watershed size. It was illustrated that HEC-HMS application in a watershed of more diversity was more sensitive to data resolution. Using cell size of 100 m and less could guaranty the result of the HEC-HMS application regardless of DEM origin and size of watersheds. Rainfall Runoff modeling especially in ungauged watersheds is almost dependent on hydro-geomorphologic data. In this regard, the effects of data and DEM resolution on deriving watershed’s geomorphologic data such as subbasins area, channels and subbasins’ slope should be well realized in modeling. In this research, HEC-HMS as the rainfall runoff model and two subbasins with different areas, geomorphologic properties and climate were selected for studying. By reducing the cell size of the DEM derived from a topo map, simulated peaks increased. For DEM cell sizes less than 100 m, the differences in simulated peak were limited to 2 to 5%. Using SRTM DEMs against the topo DEM at the scale of 1:25000, representing the effects of data resolution in rainfall runoff modeling, led to obtaining higher flood peaks at the two watersheds. Such an outcome was obtained for time to peak, hydrograph base time, and the slope of hydrograph rising limb. Change of SRTM DEM resolution affected the model output more than the case of using topo DEM. Decreasing DEMs resolution by decreasing information content of the topo DEM reduced differences in the model output when using two different sources of DEM. Furthermore, it is concluded that the extent of scale effect in modeling could not be inferred by watershed size. It was illustrated that HEC-HMS application in a watershed of more diversity was more sensitive to data resolution. Using cell size of 100 m and less could guaranty the result of the HEC-HMS application regardless of DEM origin and size of watersheds.
Full-Text [PDF 1213 kb]   (5954 Downloads)    
Article Type: Original Manuscript | Subject: Earthquake
Received: 2017/01/16 | Accepted: 2017/09/18 | Published: 2018/05/23

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.